0000911: [SWAN] Acoustic Test Requirement for Mass Production

ID	Project	Category	View Status	Date Submitted	Last Update

0000911	K18X001.00 SKB SWAN	General	public	2020-09-03 14:14	2022-08-17 16:01

Reporter	(ALTech) SH Son	Assigned To	~~(RD) Fu-chiang Young~~	Due Date
Priority	normal	Severity	s3-moderate	Reproducibility	have not tried
Status	closed	Resolution	fixed

Summary	0000911: [SWAN] Acoustic Test Requirement for Mass Production
Description	[SWAN] Acoustic Test Requirement for Mass Production. This is draft version
Tags	No tags attached.
Attach Tags	(Separate by ",")

User List	(ALTech) BY Lee , (ALTech) JW Kim , (ALTech) Lonnie Kim , (ALTech) Philip , (ALTech) SH Son , (ALTech) Sophie Lee , ~~(ALTech) Sun Choul Joung~~ , (ALTech) SY Yoon , (HW) Sean Chiang , (HW) Tom Lee , ~~(PM) Dennis Lu~~ , ~~(PM) Henry Chiou~~ , (PM) Tiffanie Lai , ~~(RD) Fu-chiang Young~~ Username

(ALTech) SH Son 2020-09-03 14:16 developer	SWAN Acoustic Test Requirement for Mass Production_V0.1.pdf (618,089 bytes)

~~(PM) Henry Chiou~~ 2020-09-04 15:07 developer ~0004237	Hi SH Thanks for the detailed description. We have some questions to check with you: 1. Testing items: On top of THD and FR for MIC and speaker, ALT requests the addition of Rub&Buzz & R/L Balance for speaker and sensitivity &Balance for MIC. For MIC the sealing and isolation will be needed. Is it correct? 2. Is there any advice for testing MIC sealing and isolation? Or could you help check how AI2 is done in terms of this? We can do both manually or with automated equipment. Plz kindly help reply by Monday. Best, Henry

(ALTech) SH Son 2020-09-07 14:55 developer ~0004251	Hi Henry. Reply your questions. 1. as I brief review your Test Structure Proposal, I think it will include the test I requested Rub&Buzz & R/L Balance for speaker and sensitivity &Balance for MIC. Could you please shear detail test scenario ? ▪ MIC frequency response ▪ MIC Harmonic Distortion ▪ SPK frequency response ▪ SPK Harmonic Distortion 1-1 Yes, For MIC the sealing and isolation will be needed. The MIC sealing will be in charge Inkel. However, there may be parts at Foxconn to help. 2. It is confidential to the AI2 company. As a discussing with the SKB engineer, - the MIC sealing and isolation test will validation EVT / DVT stage. - These test for mass production can skip based on stage test report. So, I will make proposal to skip mass production test after the DVT based on development stage test result. I think need your help about this. Thanks SON

~~(PM) Henry Chiou~~ 2020-09-11 15:59 developer	AI Soundbar Test Proposal (V03)(1).pdf (1,493,589 bytes)

~~(PM) Henry Chiou~~ 2020-09-11 15:59 developer ~0004311	Dear Mr. Yoon, SH Plz find below updated testing scenario and equipment list and confirm if we will follow this proposal to set up the DVT testing environment by 9/14. After receiving your confirmation we will proceed to pass the request to factory to evaluate what equipment or fixture could be leveraged with current resources then update the quotation for this afterwards. Best, Henry

(ALTech) SH Son 2020-09-14 15:51 developer ~0004327	Hi Henry, we reviewed test proposal, here is the answer. 1. Test station configuration(equipment) changed. : Confirmed. : Please add the test equipment datasheet below - Audio amplifier & Analyzer – MegaSig PM 6143 - MIC – GRAS 40 pp 2. About Acoustic chamber my understating as your proposal, Acoustic chamber size is same without Auto test. right? Chamber technical spec is confirmed. but as your proposal - chamber Total outer size of equipment: W1500mm x D2180mm x H2000mm 2.1) If you need to make it at ALT cost -> NOT ACCEPT. It's a over spec size for swan. 2.2) if Foxconn consigned common equipment (ALT not need to pay) -> accept. 2.3) if the chamber need to manufacture with dedicated SWAN at ALT cost, - The inner size should be at least D1000mm * W800mm. - ALT will confirm after checking the cost. also these equipment paid by ALT, must be returned to us after production is over. If you have any question, please contact me. Thanks SON

~~(PM) Henry Chiou~~ 2020-09-16 17:44 developer ~0004361 Last edited: 2020-09-16 17:44	Hi SH Data sheet 1. Audio amplifier & Analyzer – MegaSig PM 6143: PDF is in Chinese so I had the vendor did some translation with EXCEL as attached 2. MIC – GRAS 40 pp: https://www.ni.com/pdf/manuals/G.R.A.S._40PP.pdf The chamber size is updated as attached proposal v4. After the product EOL the equipment will be returned right away. Plz confirm the proposal and we will go to the quotation process to initiate the preparation ASAP. Thanks Henry AI Soundbar Test Proposal (V04).pdf (1,096,697 bytes) PM4163.pdf (599,319 bytes) PM4163.xlsx (13,833 bytes)

(ALTech) SH Son 2020-09-22 16:09 developer ~0004421	Hi henry 1. datasheet -> got it. 2. chamber size. It is a little different from we expected. Our idea was to put a chamber on the table and use it. To minimize investment costs for chamber size. But, your proposal is still huge chamber size H2000mm. So, Action item 1. Please provide the basis for the size of H2000mm and provide a quote. 2. Please search and quote table type Acoustic chamber Just for your reference,the below link and image. http://nubicom.vn/tescom/RF-Shield-Box.jsp Thanks SON Acoustic chamber_referance.png (358,393 bytes)

~~(PM) Henry Chiou~~ 2020-11-03 14:41 developer ~0004840	Hi SH, Plz find attached the final design draft for equipment and confirm by 11/4 morning for vendor to proceed with BOM preparation. The testing MIC and loud speaker are designed to be adjusted flexibly as the DUT MIC and SPK spec/ location are not fixed yet FYI Thanks Henry AI Soundbar Test chamber Proposal v03(1).pdf (447,232 bytes)

(ALTech) SH Son 2020-11-04 14:04 developer ~0004857	Hi Henry. at this time we can't not confirmed this structure. Please see the attachment file. but, inner fixture structure is only confirm that adjusted flexibly is good solution at this time. Thanks SON SWAN Acoustic Test chamber.pptx (1,698,990 bytes)

~~(PM) Henry Chiou~~ 2020-11-04 15:40 developer ~0004863	Hi SH In response to your questions. Plz confirm if we proceed to next step or let me know if you still have other questions. I know both MIC and SPK location are not finalized and may change after DVT but as said before we will work with vendor to take into consideration the changing factor and add the adjustment flexibility to reduce the risk of paying OSS. Q1. Please explain the reason why the external structure is different from the previous proposal. [Henry]The 1st proposal is designed to be straight placement and the 2nd proposal is horizontal placement considering the operation process. There will be no extra cost. Q2. Why was the substructure changed? Q2.1 Currently, the proposed substructure cannot be confirmed. It is unstable [Henry] The structure is evaluated by both vendor and factory crew and there should be no problem. Once installed on the production line, our crew will evaluate again. We highly value the safety and the property. Q2.2 It was a total solution that included test equipment (ig. PC), where did these installed? [Henry]The other testing equipment will be put on the shelf under the chamber including PC. Only the monitor is placed above the chamber to optimize the equipment placement on the production line.

(ALTech) SH Son 2020-11-09 13:54 developer ~0004901	HI Henry. Ok. understood. Please prepare the test equipment only for DVT. after DVT test, Let's discuss further.for MP test equipment. Thanks SON

~~(PM) Henry Chiou~~ 2020-12-24 20:46 developer ~0005607	Hi SH, As we reviewed the testing items verification with equipment vendor today, we will not be able to test the R/L balance for speakers because from the HW design 2 woofers are bundled and tweeter & mid-range are bundled which causes the inherently incapability of testing R/L balance for each speaker unit and thus we will not test this item on production line. Plz let me know if any questions. Thanks Henry

(ALTech) SH Son 2020-12-28 11:57 developer ~0005628	Hi Henry 1. Please skip R/L balance for woofer speakers. - this is only for DVT 2. Please proceed Mid/Twitter R/L balance for speakers. - we think that Mid/Twitter can be controlled by amp IC. Please let me know if you need any additional confirmation about DVT test item. Thanks SON

(HW) Sean Chiang 2020-12-28 21:49 developer ~0005639	Hi SH, Please see my comment as below , 1. For item1, I'm don't understand why you mentoned that the R/L balance test for woofer speaker only can be skip in DVT build? 2. Fpr item2, from my understanding, the Mid range and tweeter speaker can not be controlled independently by Audio AMP. So, we think it's doesn't make sense to perform R/L balance for Mid/Tweeter speaker. Please let me know if you have any questions. Thanks, Regards, Sean

~~(PM) Henry Chiou~~ 2021-04-07 19:42 developer ~0006620	Hi SH, I'd like to provide the proposal of the extra fixture needed to replace the current one due to design change. The main adjustment will be the new fixture and extra 2 MICs for DUT speakers. The cost will be updated later as I'm still negotiating with vendor. Besides, we are running into some issues below 1. It takes almost 20 minutes to test 1 soundbar in DVT2(9 testing points for each MIC and each combination of speakers). Are there any chances to reduce the testing items specified in the proposal? We will also study how to reduce the testing time at the same time. 2. The LT for the new fixture is 5WKs + 2WKs process time. We will not be able to catch up with DVT3 build. The workaround will be using current 2 MICs to test the front speakers and flip over the soundbar and test the bottom speakers. Are there any concerns about this temporary solution? Thanks, Henry AI Soundbar Tester Modification Proposal 0407.pdf (1,246,058 bytes)

(ALTech) SH Son 2021-04-08 09:09 developer ~0006626	Hi Henry Thank you for update test proposal Here is answer below 1. Confirm the design change - new fixture and extra 2 MICs for DUT speakers. 2. Please provide detail DVT2 test scenario about 9 testing points for each MIC and each combination of speakers : Let's review it together which test item can reduce time or improved testing procedure. 3. Agree for workaround DVT3 test solution. Please modify the test program until DVT3 starts. : be careful scratch on the housing. specially top / rear area when flip over the soundbar Thanks SON

(ALTech) SH Son 2021-04-13 16:03 developer ~0006689	Hi Henry + Please share the DVT acoustic test raw data. ALT want to check and analysis and defined the acoustic MP test spec. Thanks SON

~~(PM) Henry Chiou~~ 2021-04-14 15:21 developer ~0006709	Hi SH Sorry for late reply! I will check with factory to organize the test raw data and try to reply by 4/19. Thanks!

~~(PM) Henry Chiou~~ 2021-04-19 14:27 developer ~0006761	Hi SH Plz find attached the testing report from 67pcs used to define the spec in DVT2, including the Cpk data for you to better check the distribution. For DVT3 we will need to re-run the samples to define the spec again because the speaker is changed. The setting was testing 1 point and analyze, as there are more testing points, the time spent will be longer. We have discussed with vendor to change to scanning method, which requires to scan all the frequency points once and we extract the needed data only. We believe this way will help reduce the testing time and need to verify in DVT3. If you have any advice, plz kindly share with us. Plz be noted in previous DVT builds the FR and THD for MIC were not tested as the vendor, based on their experiences, suggest to keep the sensitivity and isolation instead because the assembly issue affecting the MIC performance could be detected by these 2 items. Also the RD verification in TW confirmed the performance of MIC FR and THD to be good. Would you plz advise if we could skip THD and FR for DVT3 onward? [Testing scenario] Left Speaker: 1. FR : 100,400,800,1K,4K,8K,12K,15K,18K 2. THD : 100,400,800,1K,4K,8K,12K,15K,18K 3. Balance: 1K Middle Speaker 1. FR : 100,400,800,1K,4K,8K,12K,15K,18K 2. THD : 100,400,800,1K,4K,8K,12K,15K,18K 3. Balance: 1K Right Speaker 1. FR : 100,400,800,1K,4K,8K,12K,15K,18K 2. THD : 100,400,800,1K,4K,8K,12K,15K,18K 3. Balance: 1K MIC 1 1. Sensitivity: 20,100,500,1K,10K,24K 2. Isolation: 1K MIC2 1. Sensitivity: 20,100,500,1K,10K,24K 2. Isolation: 1K MIC3 1. Sensitivity: 20,100,500,1K,10K,24K 2. Isolation: 1K MIC4 1. Sensitivity: 20,100,500,1K,10K,24K 2. Isolation: 1K CPK_FT2-K18X001_67pcs.xls (4,489,728 bytes)

(ALTech) SH Son 2021-04-29 15:32 developer ~0006946	Hi Henry Here is Acoustic Test Requirement only for DVT3. this is for data collection purposes. not to defined the pass/fail criteria, MIC 1~4 1. Sensitivity: 100,500,1K,10K 2. Isolation: 1K SPK - L-Full range - L-Woofer - R-Full range - R-Woofer 1. FR : 100,400,800,1K,4K,8K,12K,15K,18K 2. THD : 100,400,800,1K,4K,8K,12K,15K,18K -> Measure 10% of DVT3 q'ty (about 20 pcs), the other units SKIP 3. Balance: 1K Thanks SON

~~(PM) Henry Chiou~~ 2021-05-04 19:56 developer ~0006992	Hi SH We will implement the acoustic testing in DVT3 based on the advised criteria. BTW will the same condition applied in MP? Thanks Henry

(HW) Sean Chiang 2021-05-25 00:03 developer ~0007218	Hi Mr.Yoon, Please find attached doc to understand the production capability based on DVT2 build and the test items & time of the acoustic chamber. The total test time of acoustic chamber is 950sec, which is a bottleneck of the production line in SWAN project now. We should check the test items in detail and try to reduce the test frequency points to optimize the test time first. Please check it and let us know your thought. Thanks. Regards, Sean Production capability of acoustic chamber.pptx (286,894 bytes)

(ALTech) SH Son 2021-06-02 10:04 private developer ~0007328	Hi Sean Here is feedback as acoustic test item. l I'll explain it to Philip our concept, and talk to the acoustic chamber vender if necessary. Thanks SON Production capability of acoustic chamber _ALT Feedback.xlsx (15,928 bytes)

(ALTech) SH Son 2021-06-02 10:23 private developer ~0007331	Hi Sean Here is feedback as acoustic test item. l I'll explain it to Philip our concept, and talk to the acoustic chamber vender if necessary. Thanks SON Production capability of acoustic chamber _ALT Feedback_v1.xlsx (15,928 bytes)

(ALTech) SH Son 2021-06-02 10:29 developer ~0007333	Hi Sean Here is feedback as acoustic test item. l I'll explain it to Philip our concept, and talk to the acoustic chamber vender if necessary. Sorry for typo previous attachment file please see the below Production capability of acoustic chamber _ALT Feedback_v2 Thanks SON Production capability of acoustic chamber _ALT Feedback_v2.xlsx (15,928 bytes)

(HW) Sean Chiang 2021-06-04 02:04 developer ~0007355	Hi SH, Please refer to the attachment for the updated test time based on the discussion with the chamber vendor and your feedback. So far, the total test time can be reduced from 950s to 442s. and the required number of chamber will be 2/2/4 based on 3K/5K/10K production capability. I aware that you only leave one test point for THD of each speaker, and I believe that will help greatly reduce the test time a lot because the FR test should be able to perform by using sweep file, but it still need time to verify in the DVT3 build. We will continue to work with chamber vendor & our SQA team to optimize test time. Will keep you updated once there are any new progress here. Thanks, Regards, Sean Production capability of acoustic chamber_0603.pptx (335,073 bytes)

(ALTech) SH Son 2021-06-04 09:45 developer ~0007361	Hi Sean First of all, ALT will help to optimize test time, Please share the detail test scenario or test method Here is question for your updates. 1. about Speaker Balance : why don't you marge each speaker type? I think can marge each Right / Left speaker type. such as play sound R-L woofer -> check woofer Speaker Balance / play sound R-L full range -> check full range Speaker Balance 2. DUT connection : as your excel sheet, DUT connection time (Booting time 30s) is applied. and capability analysis also applied ping on time (Booting time 40s) Duplicate booting time. one side should be removed. Thanks SON

(HW) Sean Chiang 2021-06-08 21:34 developer	Production capability of acoustic chamber _ALT Feedback_v4.xlsx (24,237 bytes)

(HW) Sean Chiang 2021-06-08 21:34 developer ~0007398	Hi SH, Please refer to the latest sheet of attached file for my update. We discussed with chamber vendor and change the speaker FR test by using sweep file. The total test time can be reduced to 332s. Please see my comment for your questions as below, 1. According to the chamber vendor, if we play L and R speaker sound in the same time. It's not possible to recognize L and R sound pressure in the same time. 2. Yes, you are right. So, I remove the connection test time from excel file. For the detailed test procedure /method, vendor will prepare it and provide that on 6/9. Regards, Sean

(ALTech) SH Son 2021-06-09 09:45 developer ~0007401	Hi Sean. reply 0000911:0007398. As we talked wechet, it is still need to reduce time. our target is around 1 min for testing. Please find the solution and let us know and additional request. as you know, this Acoustic chamber cost was paid by ALT and it is ALT asset including test solution. So, please upload the below technical data. 1. Acoustic chamber drawing or 3d modeling data 2. fixture drawing or 3d modeling data 3. Acoustic chamber vender contact point 4. brief the Acoustic test solution Thanks SON

(ALTech) Lonnie Kim 2021-06-09 11:59 developer ~0007404	Hi Sean I updated target time and test stream at your provided file. Please provide to vendor then get a feedback. Best regards Lonnie Kim Production capability of acoustic chamber _ALT Feedback_v4_0609.xlsx (28,174 bytes)

(HW) Sean Chiang 2021-06-09 15:57 developer ~0007411	Hi Fu-Chiang, As talked, please check with chamber vendor to prepare below data requested by SH. Thanks! https://mantis.cnsbg.foxconn.com/vaas/view.php?id=911#c7401 1. Acoustic chamber drawing or 3d modeling data 2. fixture drawing or 3d modeling data 3. Acoustic chamber vender contact point 4. brief the Acoustic test solution Thanks, Regards, Sean

(HW) Sean Chiang 2021-06-10 12:46 developer ~0007427	Hi SH and Lonnie, Vendor use the same file format to update test procedure and also their feedback comment. Please check column N&O for the details. Since the test procedure is not finalize yet, it's a draft version based on DVT1/2 build production test. Regards, Sean Production capability of acoustic chamber _test procedure_0609.xlsx (29,141 bytes)

~~(RD) Fu-chiang Young~~ 2021-06-15 13:53 developer ~0007464	Hi Lonnie, According to our VN team said that the chamber cannot provide due to the design belong to vendor. Vendor will not provide the 3D chamber design. Unless we spend the design fee, etc. For fixture design, it is FXN design but currently the VN team does not receive PO, we will wait until the PO. Thank you. @Dennis and Tiffanie, Stanley needs PO to start their design work for test fixture of new speaker. Could you please start go PO for Stanley? Thank you.

(HW) Sean Chiang 2021-06-16 20:36 developer ~0007479	Hi SH and Lonnie, We continue to discuss with vendor, and finally they agreed that the THD can be tested simultaneously with FR. Therefore, the test time can be reduced to 284s. Please check the update as attachment. Thanks. Regards, Sean Production capability of acoustic chamber _test procedure_0615.xlsx (32,603 bytes)

(ALTech) SH Son 2021-06-17 09:34 developer ~0007481	Hi Sean. good to reduce the test time as we requested concept. but still a big difference in our thinking. Please check my feedback as attached. and review with vender Thanks SON Production capability of acoustic chamber _test procedure_0615_alt feedback.xlsx (34,485 bytes)

(HW) Sean Chiang 2021-06-18 15:41 developer ~0007500	Hi SH, Got it. We will review it with vendor and get back to you before next Monday. Also, will provide the stream file used for acoustic test for you. Hi Fu-Chiang, As talked, let's have a discussion with vendor and prepare all the data to SH asap. Thanks! Regards, Sean

(HW) Sean Chiang 2021-06-21 22:24 developer ~0007512	Hi Philip, Please refer to the sheet "production capability 3K.5K.10K" as attachment. The test time is estimated based on following condition. Thanks. * Production hrs / day: 18 hrs * Production day / month: 26 days Regards, Sean Production capability of acoustic chamber _test procedure_0621_alt feedback.xlsx (2,057,019 bytes)

~~(RD) Fu-chiang Young~~ 2021-06-22 19:18 developer ~0007522	Hi SH, Update the FII reply for acoustic test procedure. And upload the equipment which provided by Stanley in wechet. Upload the wav file for 2 seconds of each frequency point. Thank you. Production capability of acoustic chamber _test procedure_0622_FII feedback.xlsx (36,012 bytes) speaker test wavefile_updated_0607.zip (277,745 bytes) 20210615-equipment.zip (2,296,582 bytes)

(ALTech) SY Yoon 2021-06-22 19:31 developer ~0007524	HI Sean Chiang, Can we combine ping on and Load/unload time ? If we can plug in and load the DUT, then we can reduce load and unload time. Can you check it ?

(ALTech) SH Son 2021-06-23 10:04 developer ~0007532	HI Fu-chiang Young Please upload fixture 3d modeling data also Thanks SON

(HW) Sean Chiang 2021-06-23 13:51 developer ~0007535	Reply 0000911~0007524 Hi Mr.Yoon, The ping on and load/unload time are estimated by factory IE. Let me check the detailed test procedure for these two items with IE/TE to see if we can reduce the load/unload time. Will get back to you later once I get update from factory side. Regard, Sean

~~(RD) Fu-chiang Young~~ 2021-06-26 22:34 developer ~0007559 Last edited: 2021-06-28 11:28	Hi Lonnie and SH, Update the Chamber 3D model. Thank you. OTT AI 隔音箱组件(1)(1).STEP (255,350,384 bytes)

(ALTech) SH Son 2021-06-28 16:31 developer ~0007565	Hi Sean Thankyou for update 3d modeling. and any other update yet? 0000911:0007535 and 0000911:0007500 Thanks SON

(HW) Sean Chiang 2021-06-29 19:03 developer ~0007580	Hi SH, Please refer to the attached for the detailed test procedure of load/unload time. According to our TE/IE engineer in VN site, the load/unload time can not be reduced because after plug network cable and power cable, then the product start ping. So that the test time always = test time + ping on time + operator operating time By the way, the ping on time 40s that IE engineer provided to me before is not corrected. They update me the latest ping on time is 30s. Please note about this. Regards, Sean K18X001.00 FT2 Each station working time.xlsx (14,476,339 bytes)

(ALTech) SH Son 2021-07-06 09:47 developer ~0007609	Hi Sean. Please update the status. Dennis's today action tracker below. 1. Acoustic testing equipment : => Acoustic vendor is working with MFG TE to implement the test scenario in DVT3 => The test program can be completed by 7/5 Thanks SON

(ALTech) SH Son 2021-07-08 08:10 developer ~0007624	HI Sean and Dennis ALT want to know more details, Please take a recording file at FT2 test station. - from the SWAN loading to unloading FT2 station. We will Review and send feedback for improvement. Also please request to acoustic chamber vender, a acoustic test scenario applied to DVT3 FT2 within today. As you know, the delivery schedule delay due to test station, it is critical impact this project. Please contact to Sophie if you have any questions Ps. I will commented same as at mantis Thanks SON

(HW) Sean Chiang 2021-07-09 20:51 developer ~0007644	Hi SH, Please refer the test logs of FT2 test station so far as attached file. The detailed test time, procedure, test result and criteria are included in the log file. Please review it and let us know if you have any questions and advice. Thanks, Regards, Sean K18_2154002956.zip (376,452 bytes)

(ALTech) SH Son 2021-07-12 08:28 developer ~0007645	Hi Sean I will review the FT2 test logs and feedback to you soon. additional request on FT2 station. - Total test q’ty  Pass q’ty  NG q’ty  List up the NG test items. Thanks SON

~~(RD) Fu-chiang Young~~ 2021-07-13 06:56 developer ~0007661	Hi SH, Here is the FT2 station information. - Total test q’ty: 135 pcs, end of 7/12.  Pass q’ty: 134 pcs, first fail: 11 pcs(see attached file)  NG q’ty: 1 pcs  List up the NG test items. Fail item as attached file. Thank you. K18X001.00 FT2 Fail item.xls (37,888 bytes)

~~(RD) Fu-chiang Young~~ 2021-07-26 10:40 developer ~0007731	Hi SH, Update the FT2 station test log for DVT3 samples. Thank you. CPK_K18X001.xls (4,072,448 bytes)

~~(RD) Fu-chiang Young~~ 2021-08-02 12:34 developer ~0007780	Hi SH, Update the mic sealing test results. Original we paste single adhesive between sponge mic rubber and mic PCB. But the test results cannot satisfy 25dB. We paste another adhesive between top cover and sponge mic rubber to strengthen sealing sensitivity. It seems the same results for top covers. It can duplicate. Please see the attached report. Thank you. BFX_UA300_MIC sealing test_20210730.pdf (1,764,168 bytes)

(ALTech) SH Son 2021-08-06 16:22 developer ~0007828	Hi Fu-chiang Young See my reply 0000952:0007825 Thanks SON

(ALTech) SH Son 2021-08-06 16:25 private developer ~0007829	Hi Sean here is additional test item for acoustic test : Air leakage test Please see the details in attachment file and please suggest a solution until 8/12 this is critical to quality of soundbar product. FII have to test on the factory for all of units. Thanks SON Swan_soundbar_sound_leackage_review.pdf (904,606 bytes)

(ALTech) SH Son 2021-08-06 16:31 developer ~0007830	Hi Sean here is additional test item for acoustic test : Air leakage test Please see the details in attachment V1 file and please suggest a solution until 8/12 this is critical to quality of soundbar product. FII have to test on the factory for all of units. Thanks SON Swan_soundbar_sound_leackage_review_v1.pdf (904,303 bytes)

(ALTech) SH Son 2021-08-11 10:20 developer ~0007842	Hi Sean, Any update as I request Air leakage test?

(HW) Sean Chiang 2021-08-11 12:33 developer ~0007844	Hi SH, We will ask acoustic vendor to implement air leakage test in production line. Let us check with vendor and let you know if any problem by this week. For the air leakage defect, they all seem to be assembly problem on the production line such as glue apply on bushing and gasket attachment defect. We will send your review report to factory QA and ask for the corrective action report to ALT. Will let you know the due day tomorrow. Thanks, Regards, Sean

(HW) Sean Chiang 2021-08-12 17:35 developer ~0007856	Hi SH, Please refer to the attached picture for the test environment setup recommended by acoustic chamber vendor for air leakage test. The vendor suggest adding additional test station for air leakage testing according to the normal test method. However, your test guide seems quite different with vendor's proposal according to your report. Can you provide following information for vendor and Fii reference? 1. What parameters should be compared & verify for air leakage test to ensure the air leakage is no problem 2. What is the test criteria & specification? 3. Can you provide test report according to your test method/guide for reference? Thanks, Regards, Sean air leakage test environment setup.PNG (214,171 bytes) air leakage test environment setup.PNG (214,171 bytes)

(ALTech) SH Son 2021-08-12 17:48 developer ~0007857	Hi Sean I'm not sure that flow meter can be detect the air leakage from SWAN (DUT) as your diagram is input the air outside. but. my point is air leakage from inside of SWAN due to assembly defect. Can you share the detail test concept and scenario? it is not enough Thanks SON

(HW) Sean Chiang 2021-08-12 18:12 developer ~0007859	Hi SH, I'm asking vendor to provide more detailed concept diagram, test procedure and real picture, etc. Will provide related data to you reference once I received it from vendor. Thanks, Regards, Sean

(HW) Sean Chiang 2021-08-12 20:55 developer ~0007862	Hi SH, For assembly defects related to air leakage performance, our VN factory PQE will prepare the corrective action report(8D) for ALT before next Wednesday(8/18). Thanks, Regards, Sean

(ALTech) SH Son 2021-08-13 16:38 developer ~0007866	Sean. Please note why I request for additional testing that, the assembly defect is too critical to product sound quality due to assembly defects. From a product assembly point of view, I'm just let you know what are makes air leakage. ALT is not acceptable any additional cost or time delay about this test. Thanks SON

(HW) Sean Chiang 2021-08-13 20:52 developer ~0007869	Hi SH, There are two questions from our PQE for ALT's report as below, 1. For the gasket attachment defect in page 7, ALT doesn't raise this issue in DVT1&DVT2 build but only in DVT3. So, factory just follow the same assembly procedure as DVT1&2 to stick the gasket on top cover for DVT3 build samples, and the assembly procedure also doesn't describe clearly for this portion. Therefore, we can found this kind of defect in DVT3 sample. 2. For missing inner gasket in page 10, this defect should be found in DVT2 instead of DVT3. I understand that the air leakage is critical to product sound quality. Therefore, we should consider this test item no matter there is any defects be found in production line or not. Also, if your are concern about the cost issue, we should try to implement this test by using your test guide, but we need more information as I request on 8/12. Please let us know your comment asap. Anyway, let's have further discussion and try to implement this test in production line before pre-MP. Finally, I attach the detailed block diagram and scenario for your reference. The DUT in the picture that the ME design and structure is not the same as SWAN. Therefore, the test method should be not totally the same as shown in attached diagram. We can place the SWAN in the pressure box, and input the air from outside until it reaches a certain air pressure, if there is any air leakage from the speaker chamber, the flow meter can defect the difference so that we can know whether there is any air leakage in the product. Please review it and let us know if you have any questions with the test diagram. Maybe we can host a call with Sophie or Philip to have further discussion next Monday. Thanks, Regards, Sean air leakage test block diagram.PNG (146,421 bytes) air leakage test block diagram.PNG (146,421 bytes)

(ALTech) SH Son 2021-08-17 10:40 developer ~0007876	Hi Sean. here is the answer about your questions 1. The sound area design has been changed. - DVT2 : rear side port. it is hard to hear the air leakage noise at 50Hz - DVT3 : enclosed design. it is easy to hear the air leakage noise at 50Hz due to assembly defect Although there was same assembly defect in DVT2, I did not issue an issue. because the acoustic design possible to cover the assembly defect. But. DVT3 now is Not. assembly quality is critical point for acoustic. that why I request this. 2. I know that. that is one of the causes of 50Hz noise Also, It has the same structure and the same defect may occur Please note that this ticket agenda is to solve the 50Hz noise. not a complain about assembly quality. Let's discuss the assembly quality issue with another ticket 3. about block diagram I think it's over spec test. you can simply detect the assembly defect when play 50Hz sine wave. - Normal units : pure 50hz measure - abnormal units : 50Hz + other frequency measure I know these equipment are good to fine defect. My request concept is not necessary these equipment Let's have a conference call with sound solution vender Thanks SON

(HW) Sean Chiang 2021-08-17 14:32 developer ~0007877	Hi SH, 1. Understand. Thanks for your explanation 2. OK. Please issue another ticket and add ME Jim in the discussion. 3. No problem. I have talked with vendor about the air leakage test discussion and he can join this meeting anytime this week. Let me know what time is available for you? Let us set up the conference call asap. Thanks, Regards, Sean

~~(RD) Fu-chiang Young~~ 2021-09-23 15:17 developer ~0008268	Hi SH, Update the test issue for air leakage test. Please see the attached file. The test seems not been screen out w/wo bushing, but top cover assembly issue can be screen out. Thank you. air leakage test_20210923.pdf (1,286,964 bytes)

(ALTech) SH Son 2021-09-23 23:25 developer ~0008271	HI Sean Please send me the recording file for • With bushing • Without bushing PCM or wav file is don't care. I will analyze it

~~(RD) Fu-chiang Young~~ 2021-09-24 18:06 developer ~0008287	Hi SH, Update the wav files for w/wo bushing record files. Thank you. Bushing-OK_ALT_50Hz_20210924101914.wav (2,304,080 bytes) Bushing-OK_ALT_50Hz_20210924101914.wav (2,304,080 bytes) non-bushing-ALT_50Hz_20210924150629.wav (2,304,080 bytes) non-bushing-ALT_50Hz_20210924150629.wav (2,304,080 bytes) non-bushing-ALT_50Hz_20210924151107.wav (2,304,080 bytes) non-bushing-ALT_50Hz_20210924151107.wav (2,304,080 bytes)

(ALTech) SH Son 2021-09-27 16:02 developer ~0008307 Last edited: 2021-09-27 16:10	Hi Sean, Fu-chiang Young I reviewed was file it can be detect with bushing / non-bushing. the acoustic equipment should be check other sound frequency. - Original source : 50Hz - Measuring point : 550Hz or 650Hz - Pass / Fail criteria : more than -10dB(TBD) difference between normal unit and defect unit. Please check and verify -10dB can detected for defective units see attachment file. Please discuss with chamber vender, to fine detect method. if you have any question, please contact me. Thanks SON 이미지 360.png (63,467 bytes) 이미지 360.png (63,467 bytes) 이미지 359.png (65,093 bytes) 이미지 359.png (65,093 bytes)

~~(RD) Fu-chiang Young~~ 2021-10-04 15:29 developer ~0008365	Hi SH, Currently FT2 station can screen fail unit for non-bushing unit. PE did some DOE to verify the test program, but found some issues. Here are some cases as DOE: Case 1: pass unit, assembly ok and can test pass. 50Hz: Pass 550Hz: Pass Case 2: NG unit, open top cover and test fail at 550Hz 50Hz: Pass 550Hz: Fail Case 3: NG unit, non-bushing unit and test fail at 550Hz 50Hz: Pass 550Hz: Fail In case 1/3, it is ok. But case 2, original unit should fail at 50Hz and 550Hz. Some unit can pass 50Hz but fail 550Hz. Is this case acceptable as screen out the fail unit when top cover open? Thank you.

(ALTech) SH Son 2021-10-05 08:11 developer ~0008368	Hi Fu-chiang Young if you open the top cover, the sound characteristics will changed = soundbar F0 will be change so, I think case 1 and case3 are correct what i expected. Thanks SON

~~(RD) Fu-chiang Young~~ 2021-10-05 14:33 developer ~0008373	Hi SH, Currently FT2 spec of air leakage is -72dB ~ -62dB, for screening the NG assembly units. But FATP guys said that spec will be too tight and will have too many fail units. FATP requires to change spec as -72dB ~ -55dB, which spec still can screen NG units. Could you approve FATP to change spec as -72dB ~ -55dB? The attached file is 5 units test results. Thank you. 5 units test.jpeg (599,161 bytes)

(ALTech) SH Son 2021-10-05 15:44 developer ~0008375	HI Fu-chiang Young Could you please send me more data? I'm not sure to define the test spec change refer to the the 5 unit results. please send me more NG test data. Thanks SON

~~(RD) Fu-chiang Young~~ 2021-10-05 15:57 developer ~0008377	Hi SH, I don't have more test data, but I have record wav files. Please see the attached files. Thank you. 50Hz Record file.zip (72,552,614 bytes)

~~(RD) Fu-chiang Young~~ 2021-10-07 21:00 developer ~0008410	Hi SH, Today, FT2 PE re-captured 5 units and repeat test 5 times. The test log, wav file and test data are as attached file. The SW to tell the pass/fail at 550Hz seems not enough and we need your help to provide more methods to solve station issue. Please see the attached file. Thank you. FT2 Data_20211007.7z (47,545,741 bytes)

(ALTech) SH Son 2021-10-13 17:52 developer ~0008442	Hi Fu-chiang Young Please upload the Acoustic test log this set MAC : a8 93 4a fe 79 6c SN : 2149695001202199000009 Thansk SON

~~(RD) Fu-chiang Young~~ 2021-10-14 16:25 developer ~0008456	Hi SH, Here is the test log of "a8 93 4a fe 79 6c" unit. Thank you. PASS_YW10L1B_A8934AFE796C_16_33_42.doc (60,970 bytes) {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fnil\fcharset134 Microsoft Sans Serif;}} {\colortbl ;\red0\green0\blue0;\red128\green128\blue128;\red15\green0\blue0;\red0\green0\blue255;\red0\green128\blue0;\red0\green128\blue128;\red255\green0\blue0;\red128\green0\blue0;} \viewkind4\uc1\pard\cf1\f0\fs20 TEST ... \par K18X001 FT2 Test Program V1.25 ( Build Time: Sep 28 2021 09:33:48 ) \par SFIS Data Received: \par Scanner SN data: YW10L1B \par 145 <== YW10L1B A8934AFE796CA8934AFCF2CC K18X001.00 2642000257PASS \par Ready For Test \par \cf2\fs18 16:29:18 IP1: 200.166.44.99 \par 16:29:18 IP2: 192.168.100.25 \par \cf3\fs20 MO \tab : 2642000257 \par TSN \tab : YW10L1B \par ETHMAC \tab : A8934AFE796C \par BTMAC \tab : A8934AFCF2CC \par \cf2\fs18 16:29:18 Delay200Ms \par \cf4 16:29:18 FTP Server LOG Connected OK! \par \cf1\fs20 Check DUT Alive \par Ping to IP: 192.168.100.10 \par \cf2\fs18 16:29:18 Reply from 192.168.100.10: bytes=1024 time=0ms \par \cf5\fs28 Items[1]:Check DUT Alive, [TestTime]:[[0.2]] \par \cf6\fs18 16:29:18 Send: adb disconnect \par \cf2 16:29:18 adb disconnect \par 16:29:18 disconnected everything \par 16:29:18 D:\\K18X001> \par 16:29:18 Delay200Ms \par \cf6 16:29:18 Send: adb connect 192.168.100.10:5815 \par \cf2 16:29:18 adb connect 192.168.100.10:5815 \par 16:29:18 connected to 192.168.100.10:5815 \par 16:29:18 D:\\K18X001> \par \cf6 16:29:18 Send: adb devices \par \cf2 16:29:19 adb devices \par 16:29:19 List of devices attached \par 16:29:19 192.168.100.10:5815\tab device \par 16:29:19 D:\\K18X001> \par \cf6 16:29:19 Send: adb root \par \cf2 16:29:19 adb root \par 16:29:19 D:\\K18X001> \par \cf5\fs28 Items[2]:Adb Login DUT, [TestTime]:[[0.8]] \par \cf1\fs20 Check Version \par \cf6\fs18 16:29:19 Send: adb shell fac get_version \par \cf2 16:29:19 adb shell fac get_version \par 16:29:19 v522r13e_fac-20210914 \par 16:29:19 D:\\K18X001> \par \cf4 16:29:19 Version test Pass \par \cf5\fs28 Items[3]:Version Test, [TestTime]:[[0.2]] \par \cf2\fs18 16:29:19 Connected to SQL Server \par \cf4 16:29:19 Query OK: select * from K18X001_DATA where MODEL_NAME='K18X001.00' and MO_NUMBER='2642000257' and ETH_MAC='A8934AFE796C' \par \cf2 16:29:19 A8934AFE796C\|YW10L1B\|InitImage_BFX-UA300_2020_000000662.img \par \cf6 16:29:19 Send: adb shell fac check_burnin \par \cf2 16:29:19 adb shell fac check_burnin \par 16:29:19 Burn In Started? No \par 16:29:19 Burn In Finshed? No \par 16:29:19 Burn In Time not exist \par 16:29:19 D:\\K18X001> \par \cf7 16:29:19 Burn in not success \par \cf5\fs28 Items[4]:Not Burn In, [TestTime]:[[0.3]] \par \cf6\fs18 16:29:19 Send: adb shell fac get_serial \par \cf2 16:29:19 adb shell fac get_serial \par 16:29:19 Get SerialNo: \par 16:29:19 SERIAL=SKBFXYW10L1B \par 16:29:19 D:\\K18X001> \par \cf5\fs28 Items[5]:Check Serial Number, [TestTime]:[[0.2]] \par \cf6\fs18 16:29:19 Send: adb shell fac get_wired_mac \par \cf2 16:29:20 adb shell fac get_wired_mac \par 16:29:20 get devicenode : /sys/class/net/eth0/address \par 16:29:20 MAC address: a8:93:4a:fe:79:6c \par 16:29:20 D:\\K18X001> \par \cf5\fs28 Items[6]:Check ETH MAC, [TestTime]:[[0.3]] \par \cf6\fs18 16:29:20 Send: adb shell fac get_bt_mac \par \cf2 16:29:20 adb shell fac get_bt_mac \par 16:29:20 BT_MAC_ADDRESS=A8:93:4A:FC:F2:CC \par 16:29:20 D:\\K18X001> \par \cf5\fs28 Items[7]:Check BT MAC, [TestTime]:[[0.2]] \par \cf1\fs20 Check Mute Control \par \cf6\fs18 16:29:20 Send: adb shell fac set_speaker_mute_k18 all off \par \cf2 16:29:20 adb shell fac set_speaker_mute_k18 all off \par 16:29:20 Start Set Speaker Mute all off \par 16:29:20 unmute all \par 16:29:20 D:\\K18X001> \par \cf5\fs28 Items[8]:Check Mute Control, [TestTime]:[[0.2]] \par \cf6\fs18 16:29:20 Send: adb shell fac get_amp_version \par \cf2 16:29:20 adb shell fac get_amp_version \par 16:29:20 0x30 \par 16:29:20 D:\\K18X001> \par \cf5\fs28 Items[9]:Check AMP Version, [TestTime]:[[0.2]] \par \cf2\fs18 16:29:20 system command: cmd /c TASKKILL /F /IM OTT.exe /T \par 16:29:26 Start running... \par 16:33:38 Delay249000Ms \par \cf4 16:33:39 Running Done \par \cf2 16:33:39 DUT Connection Test,1.000000,1,1,NA,PASS \par \cf4\fs26 1: DUT Connection Test = 1.000000 NA(1, 1) PASS \par \cf2\fs18 16:33:39 [2021-09-28 16:29:23.278] adb connect 192.168.100.10:5815 \par 16:33:39 already connected to 192.168.100.10:5815 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:23.441] adb devices \par 16:33:39 List of devices attached \par 16:33:39 192.168.100.10:5815\tab device \par 16:33:39 \par 16:33:39 Test Time: 0.881S \par 16:33:39 Full Range Speaker_Frequency Response - 400 Hz,82.887505,40,90,db,PASS \par \cf4\fs26 2: Full Range Speaker_Frequency Response - 400 Hz = 82.887505 db(40, 90) PASS \par \cf2\fs18 16:33:39 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:39 Start Set Speaker Mute all off \par 16:33:39 unmute all \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:39 Start Set Speaker Mute 3 on \par 16:33:39 mute 3 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:39 Start Set Speaker Mute 4 on \par 16:33:39 mute 4 \par 16:33:39 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.670] adb root \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:39 already connected to 192.168.100.10:5815 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.833] adb remount \par 16:33:39 remount succeeded \par 16:33:39 \par 16:33:39 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:39 Start set speaker vol 0 0 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:39 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:39 [v] will set volume to index=20 \par 16:33:39 [v] Connecting to AudioService \par 16:33:39 \par 16:33:39 \par 16:33:39 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:39 [v] will set volume to index=32 \par 16:33:39 [v] Connecting to AudioService \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:39 <<<<< OSAL Init \par 16:33:39 MV_Time_Init OK. \par 16:33:39 disp_test.c,main: Start! \par 16:33:39 Create disp service OK \par 16:33:39 Create AMP_Factory Library OK \par 16:33:39 disp_test.c,main: End! \par 16:33:39 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:39 <<<<< OSAL Init \par 16:33:39 MV_Time_Init OK. \par 16:33:39 disp_test.c,main: Start! \par 16:33:39 Create disp service OK \par 16:33:39 Create AMP_Factory Library OK \par 16:33:39 disp_test.c,main: End! \par 16:33:39 \par 16:33:39 Test Time: 31.529S \par 16:33:39 Full Range Speaker_Frequency Response - 800 Hz,84.116317,50,90,db,PASS \par \cf4\fs26 3: Full Range Speaker_Frequency Response - 800 Hz = 84.116317 db(50, 90) PASS \par \cf2\fs18 16:33:39 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:39 Start Set Speaker Mute all off \par 16:33:39 unmute all \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:39 Start Set Speaker Mute 3 on \par 16:33:39 mute 3 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:39 Start Set Speaker Mute 4 on \par 16:33:39 mute 4 \par 16:33:39 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.670] adb root \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:39 already connected to 192.168.100.10:5815 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.833] adb remount \par 16:33:39 remount succeeded \par 16:33:39 \par 16:33:39 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:39 Start set speaker vol 0 0 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:39 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:39 [v] will set volume to index=20 \par 16:33:39 [v] Connecting to AudioService \par 16:33:39 \par 16:33:39 \par 16:33:39 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:39 [v] will set volume to index=32 \par 16:33:39 [v] Connecting to AudioService \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:39 <<<<< OSAL Init \par 16:33:39 MV_Time_Init OK. \par 16:33:39 disp_test.c,main: Start! \par 16:33:39 Create disp service OK \par 16:33:39 Create AMP_Factory Library OK \par 16:33:39 disp_test.c,main: End! \par 16:33:39 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:39 <<<<< OSAL Init \par 16:33:39 MV_Time_Init OK. \par 16:33:39 disp_test.c,main: Start! \par 16:33:39 Create disp service OK \par 16:33:39 Create AMP_Factory Library OK \par 16:33:39 disp_test.c,main: End! \par 16:33:39 \par 16:33:39 Test Time: 0.000S \par 16:33:39 Full Range Speaker_Frequency Response - 1k Hz,82.863915,70,95,db,PASS \par \cf4\fs26 4: Full Range Speaker_Frequency Response - 1k Hz = 82.863915 db(70, 95) PASS \par \cf2\fs18 16:33:39 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:39 Start Set Speaker Mute all off \par 16:33:39 unmute all \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:39 Start Set Speaker Mute 3 on \par 16:33:39 mute 3 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:39 Start Set Speaker Mute 4 on \par 16:33:39 mute 4 \par 16:33:39 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.670] adb root \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:39 already connected to 192.168.100.10:5815 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:24.833] adb remount \par 16:33:39 remount succeeded \par 16:33:39 \par 16:33:39 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:39 Start set speaker vol 0 0 \par 16:33:39 \par 16:33:39 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:39 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:39 [v] will set volume to index=20 \par 16:33:39 [v] Connecting to AudioService \par 16:33:39 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=32 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 \par 16:33:40 Test Time: 0.000S \par 16:33:40 Full Range Speaker_Frequency Response - 4k Hz,79.931907,70,95,db,PASS \par \cf4\fs26 5: Full Range Speaker_Frequency Response - 4k Hz = 79.931907 db(70, 95) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:40 Start Set Speaker Mute 3 on \par 16:33:40 mute 3 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:40 Start Set Speaker Mute 4 on \par 16:33:40 mute 4 \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.670] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.833] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=32 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 \par 16:33:40 Test Time: 0.000S \par 16:33:40 Full Range Speaker_Frequency Response - 8k Hz,82.981367,65,95,db,PASS \par \cf4\fs26 6: Full Range Speaker_Frequency Response - 8k Hz = 82.981367 db(65, 95) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:40 Start Set Speaker Mute 3 on \par 16:33:40 mute 3 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:40 Start Set Speaker Mute 4 on \par 16:33:40 mute 4 \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.670] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.833] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=32 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 \par 16:33:40 Test Time: 0.000S \par 16:33:40 Full Range Speaker_Frequency Response - 12k Hz,62.350560,40,80,db,PASS \par \cf4\fs26 7: Full Range Speaker_Frequency Response - 12k Hz = 62.350560 db(40, 80) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:40 Start Set Speaker Mute 3 on \par 16:33:40 mute 3 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:40 Start Set Speaker Mute 4 on \par 16:33:40 mute 4 \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.670] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.833] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=32 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 \par 16:33:40 Test Time: 0.000S \par 16:33:40 Full Range Speaker_Frequency Response - 15k Hz,65.700593,40,80,db,PASS \par \cf4\fs26 8: Full Range Speaker_Frequency Response - 15k Hz = 65.700593 db(40, 80) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:40 Start Set Speaker Mute 3 on \par 16:33:40 mute 3 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:40 Start Set Speaker Mute 4 on \par 16:33:40 mute 4 \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.670] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.833] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=32 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 \par 16:33:40 Test Time: 0.000S \par 16:33:40 Full Range Speaker_Frequency Response - 18k Hz,68.092857,40,80,db,PASS \par \cf4\fs26 9: Full Range Speaker_Frequency Response - 18k Hz = 68.092857 db(40, 80) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:29:24.191] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.332] adb shell fac set_speaker_mute_k18 3 on \par 16:33:40 Start Set Speaker Mute 3 on \par 16:33:40 mute 3 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.504] adb shell fac set_speaker_mute_k18 4 on \par 16:33:40 Start Set Speaker Mute 4 on \par 16:33:40 mute 4 \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.670] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.775] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:24.833] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 70.7 MB/s (1536060 bytes in 0.021s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.107] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:25.257] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=32 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:28.250] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:54.939] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 \par 16:33:40 Test Time: 0.000S \par 16:33:40 Full Range Speaker_THD - 1k Hz,4.147641,0.0015,30,%,PASS \par \cf4\fs26 10: Full Range Speaker_THD - 1k Hz = 4.147641 %(0.0015, 30) PASS \par \cf2\fs18 16:33:40 Test Time: 0.000S \par 16:33:40 Full Range Speaker_Balance_Left - 1k Hz,11.662200,0.1,30,db,PASS \par \cf4\fs26 11: Full Range Speaker_Balance_Left - 1k Hz = 11.662200 db(0.1, 30) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:29:55.894] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:55.954] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:56.012] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 1KHz_48K_16bit_left.wav: 1 file pushed. 63.1 MB/s (960044 bytes in 0.015s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:56.295] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:56.458] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:57.355] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:57.507] adb shell fac set_speaker_mute_k18 3 on \par 16:33:40 Start Set Speaker Mute 3 on \par 16:33:40 mute 3 \par 16:33:40 \par 16:33:40 [2021-09-28 16:29:57.655] adb shell fac set_speaker_mute_k18 4 on \par 16:33:40 Start Set Speaker Mute 4 on \par 16:33:40 mute 4 \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=30 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:00.593] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:05.936] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Test Time: 10.864S \par 16:33:40 Full Range Speaker_Balance_Right - 1k Hz,11.816738,0.1,30,db,PASS \par \cf4\fs26 12: Full Range Speaker_Balance_Right - 1k Hz = 11.816738 db(0.1, 30) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:30:06.799] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:06.863] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:06.921] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 1KHz_48K_16bit_right.wav: 1 file pushed. 55.9 MB/s (960044 bytes in 0.016s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:07.195] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:07.355] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:08.369] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:08.534] adb shell fac set_speaker_mute_k18 3 on \par 16:33:40 Start Set Speaker Mute 3 on \par 16:33:40 mute 3 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:08.712] adb shell fac set_speaker_mute_k18 4 on \par 16:33:40 Start Set Speaker Mute 4 on \par 16:33:40 mute 4 \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=30 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:11.733] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:16.938] adb shell fac stop_audio \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:40 Create disp service OK \par 16:33:40 Create AMP_Factory Library OK \par 16:33:40 disp_test.c,main: End! \par 16:33:40 Test Time: 11.026S \par 16:33:40 Full Range Speaker_Left to Right Radio,0.986922,0.8,1.2,%,PASS \par \cf4\fs26 13: Full Range Speaker_Left to Right Radio = 0.986922 %(0.8, 1.2) PASS \par \cf2\fs18 16:33:40 Test Time: 0.000S \par 16:33:40 Woofer Speaker_Frequency Response - 100 Hz,84.432120,70,98,db,PASS \par \cf4\fs26 14: Woofer Speaker_Frequency Response - 100 Hz = 84.432120 db(70, 98) PASS \par \cf2\fs18 16:33:40 [2021-09-28 16:30:17.892] adb shell fac set_speaker_mute_k18 all off \par 16:33:40 Start Set Speaker Mute all off \par 16:33:40 unmute all \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:18.032] adb shell fac set_speaker_mute_k18 1 on \par 16:33:40 Start Set Speaker Mute 1 on \par 16:33:40 mute 1 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:18.191] adb shell fac set_speaker_mute_k18 2 on \par 16:33:40 Start Set Speaker Mute 2 on \par 16:33:40 mute 2 \par 16:33:40 \par 16:33:40 \par 16:33:40 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:18.355] adb root \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:18.454] adb connect 192.168.100.10:5815 \par 16:33:40 already connected to 192.168.100.10:5815 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:18.512] adb remount \par 16:33:40 remount succeeded \par 16:33:40 \par 16:33:40 Woofer_speaker_FR_THD_1sec.wav: 1 file pushed. 35.7 MB/s (288060 bytes in 0.008s) \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:18.794] adb shell fac set_speaker_vol 0 0 \par 16:33:40 Start set speaker vol 0 0 \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:18.949] adb shell fac set_media_volume 20 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=20 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 \par 16:33:40 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:40 [v] will set volume to index=28 \par 16:33:40 [v] Connecting to AudioService \par 16:33:40 \par 16:33:40 [2021-09-28 16:30:22.120] adb shell fac play_audio /data/facaud.wav \par 16:33:40 <<<<< OSAL Init \par 16:33:40 MV_Time_Init OK. \par 16:33:40 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:30.945] adb shell fac stop_audio \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 \par 16:33:41 Test Time: 13.835S \par 16:33:41 Woofer Speaker_Frequency Response - 400 Hz,92.190067,70,98,db,PASS \par \cf4\fs26 15: Woofer Speaker_Frequency Response - 400 Hz = 92.190067 db(70, 98) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:30:17.892] adb shell fac set_speaker_mute_k18 all off \par 16:33:41 Start Set Speaker Mute all off \par 16:33:41 unmute all \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.032] adb shell fac set_speaker_mute_k18 1 on \par 16:33:41 Start Set Speaker Mute 1 on \par 16:33:41 mute 1 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.191] adb shell fac set_speaker_mute_k18 2 on \par 16:33:41 Start Set Speaker Mute 2 on \par 16:33:41 mute 2 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.355] adb root \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.454] adb connect 192.168.100.10:5815 \par 16:33:41 already connected to 192.168.100.10:5815 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.512] adb remount \par 16:33:41 remount succeeded \par 16:33:41 \par 16:33:41 Woofer_speaker_FR_THD_1sec.wav: 1 file pushed. 35.7 MB/s (288060 bytes in 0.008s) \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.794] adb shell fac set_speaker_vol 0 0 \par 16:33:41 Start set speaker vol 0 0 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.949] adb shell fac set_media_volume 20 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=20 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=28 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:22.120] adb shell fac play_audio /data/facaud.wav \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:30.945] adb shell fac stop_audio \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 \par 16:33:41 Test Time: 0.000S \par 16:33:41 Woofer Speaker_Frequency Response - 800 Hz,93.467112,70,98,db,PASS \par \cf4\fs26 16: Woofer Speaker_Frequency Response - 800 Hz = 93.467112 db(70, 98) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:30:17.892] adb shell fac set_speaker_mute_k18 all off \par 16:33:41 Start Set Speaker Mute all off \par 16:33:41 unmute all \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.032] adb shell fac set_speaker_mute_k18 1 on \par 16:33:41 Start Set Speaker Mute 1 on \par 16:33:41 mute 1 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.191] adb shell fac set_speaker_mute_k18 2 on \par 16:33:41 Start Set Speaker Mute 2 on \par 16:33:41 mute 2 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.355] adb root \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.454] adb connect 192.168.100.10:5815 \par 16:33:41 already connected to 192.168.100.10:5815 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.512] adb remount \par 16:33:41 remount succeeded \par 16:33:41 \par 16:33:41 Woofer_speaker_FR_THD_1sec.wav: 1 file pushed. 35.7 MB/s (288060 bytes in 0.008s) \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.794] adb shell fac set_speaker_vol 0 0 \par 16:33:41 Start set speaker vol 0 0 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:18.949] adb shell fac set_media_volume 20 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=20 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=28 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:22.120] adb shell fac play_audio /data/facaud.wav \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:30.945] adb shell fac stop_audio \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 \par 16:33:41 Test Time: 0.001S \par 16:33:41 Woofer Speaker_THD - 400 Hz,1.617916,0.0015,20,%,PASS \par \cf4\fs26 17: Woofer Speaker_THD - 400 Hz = 1.617916 %(0.0015, 20) PASS \par \cf2\fs18 16:33:41 Test Time: 0.000S \par 16:33:41 Woofer Speaker_Balance_Left - 1k Hz,3.873437,0.1,20,db,PASS \par \cf4\fs26 18: Woofer Speaker_Balance_Left - 1k Hz = 3.873437 db(0.1, 20) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:30:31.838] adb root \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:31.897] adb connect 192.168.100.10:5815 \par 16:33:41 already connected to 192.168.100.10:5815 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:31.955] adb remount \par 16:33:41 remount succeeded \par 16:33:41 \par 16:33:41 1KHz_48K_16bit_left.wav: 1 file pushed. 55.1 MB/s (960044 bytes in 0.017s) \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:32.231] adb shell fac set_speaker_vol 0 0 \par 16:33:41 Start set speaker vol 0 0 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:32.389] adb shell fac set_media_volume 20 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=20 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:33.304] adb shell fac set_speaker_mute_k18 all off \par 16:33:41 Start Set Speaker Mute all off \par 16:33:41 unmute all \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:33.458] adb shell fac set_speaker_mute_k18 1 on \par 16:33:41 Start Set Speaker Mute 1 on \par 16:33:41 mute 1 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:33.617] adb shell fac set_speaker_mute_k18 2 on \par 16:33:41 Start Set Speaker Mute 2 on \par 16:33:41 mute 2 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=28 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:36.594] adb shell fac play_audio /data/facaud.wav \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:41.936] adb shell fac stop_audio \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Test Time: 10.945S \par 16:33:41 Woofer Speaker_Balance_Right - 1k Hz,3.121108,0.1,20,db,PASS \par \cf4\fs26 19: Woofer Speaker_Balance_Right - 1k Hz = 3.121108 db(0.1, 20) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:30:42.829] adb root \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:42.891] adb connect 192.168.100.10:5815 \par 16:33:41 already connected to 192.168.100.10:5815 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:42.950] adb remount \par 16:33:41 remount succeeded \par 16:33:41 \par 16:33:41 1KHz_48K_16bit_right.wav: 1 file pushed. 54.7 MB/s (960044 bytes in 0.017s) \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:43.220] adb shell fac set_speaker_vol 0 0 \par 16:33:41 Start set speaker vol 0 0 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:43.382] adb shell fac set_media_volume 20 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=20 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:44.385] adb shell fac set_speaker_mute_k18 all off \par 16:33:41 Start Set Speaker Mute all off \par 16:33:41 unmute all \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:44.563] adb shell fac set_speaker_mute_k18 1 on \par 16:33:41 Start Set Speaker Mute 1 on \par 16:33:41 mute 1 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:44.719] adb shell fac set_speaker_mute_k18 2 on \par 16:33:41 Start Set Speaker Mute 2 on \par 16:33:41 mute 2 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=28 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:47.732] adb shell fac play_audio /data/facaud.wav \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:52.934] adb shell fac stop_audio \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Test Time: 10.915S \par 16:33:41 Woofer Speaker_Left to Right Radio,1.241046,0.7,1.4,%,PASS \par \cf4\fs26 20: Woofer Speaker_Left to Right Radio = 1.241046 %(0.7, 1.4) PASS \par \cf2\fs18 16:33:41 Test Time: 0.000S \par 16:33:41 Woofer Speaker_Air Leakage Test - 50 Hz,49.777852,48,52,Hz,PASS \par \cf4\fs26 21: Woofer Speaker_Air Leakage Test - 50 Hz = 49.777852 Hz(48, 52) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:30:53.818] adb shell fac set_speaker_mute_k18 all off \par 16:33:41 Start Set Speaker Mute all off \par 16:33:41 unmute all \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:53.952] adb shell fac set_speaker_mute_k18 1 on \par 16:33:41 Start Set Speaker Mute 1 on \par 16:33:41 mute 1 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:54.127] adb shell fac set_speaker_mute_k18 2 on \par 16:33:41 Start Set Speaker Mute 2 on \par 16:33:41 mute 2 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:54.293] adb root \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:54.390] adb connect 192.168.100.10:5815 \par 16:33:41 already connected to 192.168.100.10:5815 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:54.448] adb remount \par 16:33:41 remount succeeded \par 16:33:41 \par 16:33:41 50Hz_AirLeakageTest.wav: 1 file pushed. 6.2 MB/s (32044 bytes in 0.005s) \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:54.719] adb shell fac set_speaker_vol 0 0 \par 16:33:41 Start set speaker vol 0 0 \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:54.892] adb shell fac set_media_volume 20 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=20 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 \par 16:33:41 [v] will control stream=3 (STREAM_MUSIC) \par 16:33:41 [v] will set volume to index=32 \par 16:33:41 [v] Connecting to AudioService \par 16:33:41 \par 16:33:41 [2021-09-28 16:30:58.491] adb shell fac play_audio /data/facaud.wav \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 16:33:41 \par 16:33:41 [2021-09-28 16:31:02.734] adb shell fac stop_audio \par 16:33:41 <<<<< OSAL Init \par 16:33:41 MV_Time_Init OK. \par 16:33:41 disp_test.c,main: Start! \par 16:33:41 Create disp service OK \par 16:33:41 Create AMP_Factory Library OK \par 16:33:41 disp_test.c,main: End! \par 16:33:41 \par 16:33:41 Test Time: 9.783S \par 16:33:41 Mic1_Sensitivity - 100 Hz,44.196885,20,60,mV/Pa,PASS \par \cf4\fs26 22: Mic1_Sensitivity - 100 Hz = 44.196885 mV/Pa(20, 60) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:31:03.652] [2021-09-28 16:31:03.968] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:04.268] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:06.681] adb shell fac set_record_ffv_port on \par 16:33:41 Start record ffv port on \par 16:33:41 7 7 7 7 \par 16:33:41 SUCCESS \par 16:33:41 [2021-09-28 16:31:07.903] adb shell fac set_audio_record ffv 10 \par 16:33:41 Start audio record \par 16:33:41 Capturing sample: 2 ch, 48000 hz, 32 bit \par 16:33:41 Captured 483328 frames \par 16:33:41 [2021-09-28 16:31:19.196] adb push splitwav /data \par 16:33:41 splitwav: 1 file pushed. 4.6 MB/s (11188 bytes in 0.002s) \par 16:33:41 [2021-09-28 16:31:20.300] adb shell chmod 777 /data/splitwav \par 16:33:41 [2021-09-28 16:31:20.444] adb shell /data/splitwav /data/ffv.wav \par 16:33:41 3a fe \par 16:33:41 03 fe \par 16:33:41 50 fc \par 16:33:41 06 fe \par 16:33:41 c9 fc \par 16:33:41 [2021-09-28 16:31:23.352] adb pull /data/port1.wav ffvtemp1.wav \par 16:33:41 /data/port1.wav: 1 file pulled. 48.2 MB/s (966700 bytes in 0.019s) \par 16:33:41 Test Time: 20.985S \par 16:33:41 Mic2_Sensitivity - 100 Hz,41.999476,20,60,mV/Pa,PASS \par \cf4\fs26 23: Mic2_Sensitivity - 100 Hz = 41.999476 mV/Pa(20, 60) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:31:24.660] [2021-09-28 16:31:24.978] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:25.278] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:26.691] adb pull /data/port2.wav ffvtemp2.wav \par 16:33:41 /data/port2.wav: 1 file pulled. 57.9 MB/s (966700 bytes in 0.016s) \par 16:33:41 Test Time: 3.300S \par 16:33:41 Mic3_Sensitivity - 100 Hz,40.766921,20,60,mV/Pa,PASS \par \cf4\fs26 24: Mic3_Sensitivity - 100 Hz = 40.766921 mV/Pa(20, 60) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:31:27.984] [2021-09-28 16:31:28.302] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:28.603] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:30.014] adb pull /data/port3.wav ffvtemp3.wav \par 16:33:41 /data/port3.wav: 1 file pulled. 59.3 MB/s (966700 bytes in 0.016s) \par 16:33:41 Test Time: 3.297S \par 16:33:41 Mic4_Sensitivity - 100 Hz,38.651780,20,60,mV/Pa,PASS \par \cf4\fs26 25: Mic4_Sensitivity - 100 Hz = 38.651780 mV/Pa(20, 60) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:31:31.306] [2021-09-28 16:31:31.625] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:31.925] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:33.336] adb pull /data/port4.wav ffvtemp4.wav \par 16:33:41 /data/port4.wav: 1 file pulled. 59.6 MB/s (966700 bytes in 0.015s) \par 16:33:41 Test Time: 3.296S \par 16:33:41 Mic1_Sensitivity - 500 Hz,72.289210,40,80,mV/Pa,PASS \par \cf4\fs26 26: Mic1_Sensitivity - 500 Hz = 72.289210 mV/Pa(40, 80) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:31:34.627] [2021-09-28 16:31:34.944] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:35.244] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:37.656] adb shell fac set_record_ffv_port on \par 16:33:41 Start record ffv port on \par 16:33:41 7 7 7 7 \par 16:33:41 SUCCESS \par 16:33:41 [2021-09-28 16:31:38.864] adb shell fac set_audio_record ffv 10 \par 16:33:41 Start audio record \par 16:33:41 Capturing sample: 2 ch, 48000 hz, 32 bit \par 16:33:41 Captured 483328 frames \par 16:33:41 [2021-09-28 16:31:50.162] adb push splitwav /data \par 16:33:41 splitwav: 1 file pushed. 4.0 MB/s (11188 bytes in 0.003s) \par 16:33:41 [2021-09-28 16:31:51.263] adb shell chmod 777 /data/splitwav \par 16:33:41 [2021-09-28 16:31:51.420] adb shell /data/splitwav /data/ffv.wav \par 16:33:41 14 f5 \par 16:33:41 67 f5 \par 16:33:41 c8 f5 \par 16:33:41 37 f5 \par 16:33:41 91 f1 \par 16:33:41 [2021-09-28 16:31:54.351] adb pull /data/port1.wav ffvtemp1.wav \par 16:33:41 /data/port1.wav: 1 file pulled. 56.4 MB/s (966700 bytes in 0.016s) \par 16:33:41 Test Time: 21.150S \par 16:33:41 Mic2_Sensitivity - 500 Hz,63.325935,40,80,mV/Pa,PASS \par \cf4\fs26 27: Mic2_Sensitivity - 500 Hz = 63.325935 mV/Pa(40, 80) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:31:55.801] [2021-09-28 16:31:56.119] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:56.418] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:57.830] adb pull /data/port2.wav ffvtemp2.wav \par 16:33:41 /data/port2.wav: 1 file pulled. 58.9 MB/s (966700 bytes in 0.016s) \par 16:33:41 Test Time: 3.357S \par 16:33:41 Mic3_Sensitivity - 500 Hz,60.782870,40,80,mV/Pa,PASS \par \cf4\fs26 28: Mic3_Sensitivity - 500 Hz = 60.782870 mV/Pa(40, 80) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:31:59.182] [2021-09-28 16:31:59.499] Set OK \par 16:33:41 <bst>[2021-09-28 16:31:59.798] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:01.210] adb pull /data/port3.wav ffvtemp3.wav \par 16:33:41 /data/port3.wav: 1 file pulled. 56.2 MB/s (966700 bytes in 0.016s) \par 16:33:41 Test Time: 3.405S \par 16:33:41 Mic4_Sensitivity - 500 Hz,61.610298,40,80,mV/Pa,PASS \par \cf4\fs26 29: Mic4_Sensitivity - 500 Hz = 61.610298 mV/Pa(40, 80) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:32:02.611] [2021-09-28 16:32:02.929] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:03.229] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:04.640] adb pull /data/port4.wav ffvtemp4.wav \par 16:33:41 /data/port4.wav: 1 file pulled. 55.7 MB/s (966700 bytes in 0.017s) \par 16:33:41 Test Time: 3.408S \par 16:33:41 Mic1_Sensitivity - 1k Hz,23.212756,10,50,mV/Pa,PASS \par \cf4\fs26 30: Mic1_Sensitivity - 1k Hz = 23.212756 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:32:06.043] [2021-09-28 16:32:06.360] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:06.660] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:09.072] adb shell fac set_record_ffv_port on \par 16:33:41 Start record ffv port on \par 16:33:41 7 7 7 7 \par 16:33:41 SUCCESS \par 16:33:41 [2021-09-28 16:32:10.321] adb shell fac set_audio_record ffv 10 \par 16:33:41 Start audio record \par 16:33:41 Capturing sample: 2 ch, 48000 hz, 32 bit \par 16:33:41 Captured 483328 frames \par 16:33:41 [2021-09-28 16:32:21.609] adb push splitwav /data \par 16:33:41 splitwav: 1 file pushed. 5.1 MB/s (11188 bytes in 0.002s) \par 16:33:41 [2021-09-28 16:32:22.718] adb shell chmod 777 /data/splitwav \par 16:33:41 [2021-09-28 16:32:22.890] adb shell /data/splitwav /data/ffv.wav \par 16:33:41 ee fa \par 16:33:41 f6 f9 \par 16:33:41 0e f7 \par 16:33:41 b1 fa \par 16:33:41 de fc \par 16:33:41 [2021-09-28 16:32:26.026] adb pull /data/port1.wav ffvtemp1.wav \par 16:33:41 /data/port1.wav: 1 file pulled. 60.8 MB/s (966700 bytes in 0.015s) \par 16:33:41 Test Time: 21.246S \par 16:33:41 Mic2_Sensitivity - 1k Hz,31.025082,10,50,mV/Pa,PASS \par \cf4\fs26 31: Mic2_Sensitivity - 1k Hz = 31.025082 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:32:27.313] [2021-09-28 16:32:27.632] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:27.932] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:29.342] adb pull /data/port2.wav ffvtemp2.wav \par 16:33:41 /data/port2.wav: 1 file pulled. 60.9 MB/s (966700 bytes in 0.015s) \par 16:33:41 Test Time: 3.293S \par 16:33:41 Mic3_Sensitivity - 1k Hz,33.807236,10,50,mV/Pa,PASS \par \cf4\fs26 32: Mic3_Sensitivity - 1k Hz = 33.807236 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:32:30.630] [2021-09-28 16:32:30.948] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:31.248] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:32.659] adb pull /data/port3.wav ffvtemp3.wav \par 16:33:41 /data/port3.wav: 1 file pulled. 62.4 MB/s (966700 bytes in 0.015s) \par 16:33:41 Test Time: 3.307S \par 16:33:41 Mic4_Sensitivity - 1k Hz,29.125386,10,50,mV/Pa,PASS \par \cf4\fs26 33: Mic4_Sensitivity - 1k Hz = 29.125386 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:32:33.961] [2021-09-28 16:32:34.279] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:34.578] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:35.989] adb pull /data/port4.wav ffvtemp4.wav \par 16:33:41 /data/port4.wav: 1 file pulled. 56.2 MB/s (966700 bytes in 0.016s) \par 16:33:41 Test Time: 3.326S \par 16:33:41 Mic1_Sensitivity - 10k Hz,36.868572,10,50,mV/Pa,PASS \par \cf4\fs26 34: Mic1_Sensitivity - 10k Hz = 36.868572 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:41 [2021-09-28 16:32:37.311] [2021-09-28 16:32:37.628] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:37.928] Set OK \par 16:33:41 <bst>[2021-09-28 16:32:40.340] adb shell fac set_record_ffv_port on \par 16:33:41 Start record ffv port on \par 16:33:41 7 7 7 7 \par 16:33:41 SUCCESS \par 16:33:41 [2021-09-28 16:32:41.572] adb shell fac set_audio_record ffv 10 \par 16:33:41 Start audio record \par 16:33:41 Capturing sample: 2 ch, 48000 hz, 32 bit \par 16:33:41 Captured 483328 frames \par 16:33:41 [2021-09-28 16:32:52.867] adb push splitwav /data \par 16:33:41 splitwav: 1 file pushed. 5.3 MB/s (11188 bytes in 0.002s) \par 16:33:41 [2021-09-28 16:32:53.963] adb shell chmod 777 /data/splitwav \par 16:33:41 [2021-09-28 16:32:54.103] adb shell /data/splitwav /data/ffv.wav \par 16:33:41 63 03 \par 16:33:41 96 fc \par 16:33:42 5d 00 \par 16:33:42 c4 ff \par 16:33:42 73 07 \par 16:33:42 [2021-09-28 16:32:57.146] adb pull /data/port1.wav ffvtemp1.wav \par 16:33:42 /data/port1.wav: 1 file pulled. 79.8 MB/s (966700 bytes in 0.012s) \par 16:33:42 Test Time: 21.117S \par 16:33:42 Mic2_Sensitivity - 10k Hz,24.745842,10,50,mV/Pa,PASS \par \cf4\fs26 35: Mic2_Sensitivity - 10k Hz = 24.745842 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:42 [2021-09-28 16:32:58.451] [2021-09-28 16:32:58.769] Set OK \par 16:33:42 <bst>[2021-09-28 16:32:59.070] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:00.482] adb pull /data/port2.wav ffvtemp2.wav \par 16:33:42 /data/port2.wav: 1 file pulled. 61.1 MB/s (966700 bytes in 0.015s) \par 16:33:42 Test Time: 3.306S \par 16:33:42 Mic3_Sensitivity - 10k Hz,12.833930,10,50,mV/Pa,PASS \par \cf4\fs26 36: Mic3_Sensitivity - 10k Hz = 12.833930 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:42 [2021-09-28 16:33:01.781] [2021-09-28 16:33:02.099] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:02.399] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:03.810] adb pull /data/port3.wav ffvtemp3.wav \par 16:33:42 /data/port3.wav: 1 file pulled. 59.6 MB/s (966700 bytes in 0.015s) \par 16:33:42 Test Time: 3.303S \par 16:33:42 Mic4_Sensitivity - 10k Hz,11.862637,10,50,mV/Pa,PASS \par \cf4\fs26 37: Mic4_Sensitivity - 10k Hz = 11.862637 mV/Pa(10, 50) PASS \par \cf2\fs18 16:33:42 [2021-09-28 16:33:05.109] [2021-09-28 16:33:05.428] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:05.728] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:07.138] adb pull /data/port4.wav ffvtemp4.wav \par 16:33:42 /data/port4.wav: 1 file pulled. 60.8 MB/s (966700 bytes in 0.015s) \par 16:33:42 Test Time: 3.264S \par 16:33:42 Mic1_Isolation - 1k Hz,0.286652,0,10,mV/Pa,PASS \par \cf4\fs26 38: Mic1_Isolation - 1k Hz = 0.286652 mV/Pa(0, 10) PASS \par \cf2\fs18 16:33:42 [2021-09-28 16:33:08.397] [2021-09-28 16:33:08.715] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:09.014] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:11.425] adb shell fac set_record_ffv_port on \par 16:33:42 Start record ffv port on \par 16:33:42 7 7 7 7 \par 16:33:42 SUCCESS \par 16:33:42 [2021-09-28 16:33:12.637] adb shell fac set_audio_record ffv 10 \par 16:33:42 Start audio record \par 16:33:42 Capturing sample: 2 ch, 48000 hz, 32 bit \par 16:33:42 Captured 483328 frames \par 16:33:42 [2021-09-28 16:33:23.930] adb push splitwav /data \par 16:33:42 splitwav: 1 file pushed. 4.3 MB/s (11188 bytes in 0.002s) \par 16:33:42 [2021-09-28 16:33:25.035] adb shell chmod 777 /data/splitwav \par 16:33:42 [2021-09-28 16:33:25.168] adb shell /data/splitwav /data/ffv.wav \par 16:33:42 3c 01 \par 16:33:42 b9 00 \par 16:33:42 88 fe \par 16:33:42 2f 00 \par 16:33:42 33 01 \par 16:33:42 [2021-09-28 16:33:28.162] adb pull /data/port1.wav ffvtemp1.wav \par 16:33:42 /data/port1.wav: 1 file pulled. 71.0 MB/s (966700 bytes in 0.013s) \par 16:33:42 Test Time: 20.951S \par 16:33:42 Mic2_Isolation - 1k Hz,0.241252,0,10,mV/Pa,PASS \par \cf4\fs26 39: Mic2_Isolation - 1k Hz = 0.241252 mV/Pa(0, 10) PASS \par \cf2\fs18 16:33:42 [2021-09-28 16:33:29.371] [2021-09-28 16:33:29.690] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:29.990] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:31.400] adb pull /data/port2.wav ffvtemp2.wav \par 16:33:42 /data/port2.wav: 1 file pulled. 61.9 MB/s (966700 bytes in 0.015s) \par 16:33:42 Test Time: 3.276S \par 16:33:42 Mic3_Isolation - 1k Hz,0.268805,0,10,mV/Pa,PASS \par \cf4\fs26 40: Mic3_Isolation - 1k Hz = 0.268805 mV/Pa(0, 10) PASS \par \cf2\fs18 16:33:42 [2021-09-28 16:33:32.671] [2021-09-28 16:33:32.988] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:33.288] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:34.699] adb pull /data/port3.wav ffvtemp3.wav \par 16:33:42 /data/port3.wav: 1 file pulled. 58.8 MB/s (966700 bytes in 0.016s) \par 16:33:42 Test Time: 3.294S \par 16:33:42 Mic4_Isolation - 1k Hz,0.947912,0,10,mV/Pa,PASS \par \cf4\fs26 41: Mic4_Isolation - 1k Hz = 0.947912 mV/Pa(0, 10) PASS \par \cf2\fs18 16:33:42 [2021-09-28 16:33:35.988] [2021-09-28 16:33:36.306] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:36.605] Set OK \par 16:33:42 <bst>[2021-09-28 16:33:38.017] adb pull /data/port4.wav ffvtemp4.wav \par 16:33:42 /data/port4.wav: 1 file pulled. 81.6 MB/s (966700 bytes in 0.011s) \par 16:33:42 Test Time: 3.293S \par 16:33:42 Test Result:\tab PASS \par \cf4 16:33:42 Test Result:\tab PASS \par \cf5\fs28 Items[10]:SoundBar Test, [TestTime]:[[261.3]] \par \cf2\fs18 16:33:42 system command: cmd /c TASKKILL /F /IM iperf.exe /T \par \cf4 16:33:42 PASS \par \cf2 16:33:42 Reply from 192.168.100.10: bytes=1024 time=0ms \par 16:33:42 ___________________________________________________ \par 16:33:42 End of The Test Thread, ByeBye! \par 16:33:42 Connecting to FileRecordServer \par 16:33:42 Connect to FileRecordServer ok >>> \par 16:33:42 RECORD:FT2:K18X001.00:PASS:OK \par 16:33:42 Disconnecting to FileRecordServer \par 16:33:42 Disconnect to FileRecordServer ok >>> \par 16:33:42 Delay200Ms \par \cf4 16:33:42 FTP Server LOG Connected OK! \par \cf2 16:33:42 Send Data to SFIS: 135 <== YW10L1B A8934AFE796CA8934AFCF2CCBFX-UA300_2020_000000662 QT.19.531.16-20210825 release-keys L09K18FT2002PASS \par 16:33:42 139 <== YW10L1B A8934AFE796CA8934AFCF2CCBFX-UA300_2020_000000662 QT.19.531.16-20210825 release-keys L09K18FT2002PASSPASS \par \cf8 16:33:42 YW10L1B A8934AFE796CA8934AFCF2CCBFX-UA300_2020_000000662 QT.19.531.16-20210825 release-keys L09K18FT2002PASSPASS \par 16:33:42 YW10L1B A8934AFE796CA8934AFCF2CCBFX-UA300_2020_000000662 QT.19.531.16-20210825 release-keys L09K18FTMsg: ATE OK OK Cmd: ATE ? \par \cf1\fs20 Test Completed \par \cf2\fs18 16:33:42 Total Test Time: 262.0 seconds \par \par } PASS_YW10L1B_A8934AFE796C_16_33_42.doc (60,970 bytes)

~~(RD) Fu-chiang Young~~ 2021-10-19 16:23 developer ~0008495	Hi SH, Upload the test data collection. There are only 9 pcs units test data due to production line is working for packing and cannot borrow more units to test. Please see attached files. Thank you. K18X001_1910.zip (34,568,154 bytes)

(ALTech) SH Son 2021-10-21 09:09 developer	fr-spk.BMP (2,721,954 bytes)

(ALTech) SH Son 2021-10-21 09:09 developer ~0008518	Hi Fu-chiang Young 0000911:0008495 I review the test data, and not enough the data. If it is difficult to distinguish between good and bad, can be change the test frequency 50Hz to 70hz or 75Hz 75Hz is the maximum output SPL before F0. (please find the FR data) I think bigger speaker output level, more easy to find the defect. Please send me the data same as K18X001_1910.zip (34,568,154 bytes). I will feedback to you Thanks SON

(ALTech) SH Son 2021-10-21 09:13 developer ~0008519	Hi Sean I have to review for all of acoustic factory test data. (control run + pre MP + first MP) So, please send as excel file for test result I will update the pass-fail judgment criteria for acoustic test Thanks SON

(ALTech) SH Son 2021-10-26 13:52 developer ~0008585	Hi Fu-chiang Young Please upload the Acoustic test log this set S/N : 2149695001202199000005/MAC : A8:93:4A:FE:79:9A this set is submitted to VIP sample, but the sound output is unstable. please check and upload asap Thanks SON

(HW) Sean Chiang 2021-10-28 13:51 developer ~0008613	Hi SH, Here you are. Please check it and let us know if there is any further questionis. Regards, Sean PASS_YW10KEG_A8934AFE799A_17_38_30.doc (60,993 bytes) {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset134 Microsoft Sans Serif;}} {\colortbl ;\red0\green0\blue0;\red128\green128\blue128;\red15\green0\blue0;\red0\green0\blue255;\red0\green128\blue0;\red0\green128\blue128;\red255\green0\blue0;\red128\green0\blue0;} \viewkind4\uc1\pard\cf1\lang2052\f0\fs20 TEST ... \par K18X001 FT2 Test Program V1.25 ( Build Time: Sep 28 2021 09:33:48 ) \par SFIS Data Received: \par Scanner SN data: YW10KEG \par 145 <== YW10KEG A8934AFE799AA8934AFCF2FA K18X001.00 2642000257PASS \par Ready For Test \par \cf2\fs18 17:34:13 IP1: 200.166.44.105 \par 17:34:13 IP2: 192.168.100.25 \par \cf3\fs20 MO \tab : 2642000257 \par TSN \tab : YW10KEG \par ETHMAC \tab : A8934AFE799A \par BTMAC \tab : A8934AFCF2FA \par \cf2\fs18 17:34:13 Delay200Ms \par \cf4 17:34:13 FTP Server LOG Connected OK! \par \cf1\fs20 Check DUT Alive \par Ping to IP: 192.168.100.10 \par \cf2\fs18 17:34:13 Reply from 192.168.100.10: bytes=1024 time=0ms \par \cf5\fs28 Items[1]:Check DUT Alive, [TestTime]:[[0.2]] \par \cf6\fs18 17:34:13 Send: adb disconnect \par \cf2 17:34:13 adb disconnect \par 17:34:13 disconnected everything \par 17:34:13 D:\\K18X001> \par 17:34:13 Delay200Ms \par \cf6 17:34:14 Send: adb connect 192.168.100.10:5815 \par \cf2 17:34:14 adb connect 192.168.100.10:5815 \par 17:34:14 connected to 192.168.100.10:5815 \par 17:34:14 D:\\K18X001> \par \cf6 17:34:14 Send: adb devices \par \cf2 17:34:14 adb devices \par 17:34:14 List of devices attached \par 17:34:14 192.168.100.10:5815\tab device \par 17:34:14 D:\\K18X001> \par \cf6 17:34:14 Send: adb root \par \cf2 17:34:14 adb root \par 17:34:14 D:\\K18X001> \par \cf5\fs28 Items[2]:Adb Login DUT, [TestTime]:[[0.7]] \par \cf1\fs20 Check Version \par \cf6\fs18 17:34:14 Send: adb shell fac get_version \par \cf2 17:34:14 adb shell fac get_version \par 17:34:14 v522r13e_fac-20210914 \par 17:34:14 D:\\K18X001> \par \cf4 17:34:14 Version test Pass \par \cf5\fs28 Items[3]:Version Test, [TestTime]:[[0.2]] \par \cf2\fs18 17:34:14 Connected to SQL Server \par \cf4 17:34:14 Query OK: select * from K18X001_DATA where MODEL_NAME='K18X001.00' and MO_NUMBER='2642000257' and ETH_MAC='A8934AFE799A' \par \cf2 17:34:14 A8934AFE799A\|YW10KEG\|InitImage_BFX-UA300_2020_000000708.img \par \cf6 17:34:14 Send: adb shell fac check_burnin \par \cf2 17:34:15 adb shell fac check_burnin \par 17:34:15 Burn In Started? No \par 17:34:15 Burn In Finshed? No \par 17:34:15 Burn In Time not exist \par 17:34:15 D:\\K18X001> \par \cf7 17:34:15 Burn in not success \par \cf5\fs28 Items[4]:Not Burn In, [TestTime]:[[0.2]] \par \cf6\fs18 17:34:15 Send: adb shell fac get_serial \par \cf2 17:34:15 adb shell fac get_serial \par 17:34:15 Get SerialNo: \par 17:34:15 SERIAL=SKBFXYW10KEG \par 17:34:15 D:\\K18X001> \par \cf5\fs28 Items[5]:Check Serial Number, [TestTime]:[[0.2]] \par \cf6\fs18 17:34:15 Send: adb shell fac get_wired_mac \par \cf2 17:34:15 adb shell fac get_wired_mac \par 17:34:15 get devicenode : /sys/class/net/eth0/address \par 17:34:15 MAC address: a8:93:4a:fe:79:9a \par 17:34:15 D:\\K18X001> \par \cf5\fs28 Items[6]:Check ETH MAC, [TestTime]:[[0.2]] \par \cf6\fs18 17:34:15 Send: adb shell fac get_bt_mac \par \cf2 17:34:15 adb shell fac get_bt_mac \par 17:34:15 BT_MAC_ADDRESS=A8:93:4A:FC:F2:FA \par 17:34:15 D:\\K18X001> \par \cf5\fs28 Items[7]:Check BT MAC, [TestTime]:[[0.2]] \par \cf1\fs20 Check Mute Control \par \cf6\fs18 17:34:15 Send: adb shell fac set_speaker_mute_k18 all off \par \cf2 17:34:15 adb shell fac set_speaker_mute_k18 all off \par 17:34:15 Start Set Speaker Mute all off \par 17:34:15 unmute all \par 17:34:15 D:\\K18X001> \par \cf5\fs28 Items[8]:Check Mute Control, [TestTime]:[[0.3]] \par \cf6\fs18 17:34:15 Send: adb shell fac get_amp_version \par \cf2 17:34:16 adb shell fac get_amp_version \par 17:34:16 0x30 \par 17:34:16 D:\\K18X001> \par \cf5\fs28 Items[9]:Check AMP Version, [TestTime]:[[0.2]] \par \cf2\fs18 17:34:16 system command: cmd /c TASKKILL /F /IM OTT.exe /T \par 17:34:22 Start running... \par 17:38:27 Delay243000Ms \par \cf4 17:38:28 Running Done \par \cf2 17:38:28 DUT Connection Test,1.000000,1,1,NA,PASS \par \cf4\fs26 1: DUT Connection Test = 1.000000 NA(1, 1) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:18.494] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:18.522] adb devices \par 17:38:28 List of devices attached \par 17:38:28 192.168.100.10:5815\tab device \par 17:38:28 \par 17:38:28 Test Time: 0.636S \par 17:38:28 Full Range Speaker_Frequency Response - 400 Hz,83.151648,40,90,db,PASS \par \cf4\fs26 2: Full Range Speaker_Frequency Response - 400 Hz = 83.151648 db(40, 90) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 32.083S \par 17:38:28 Full Range Speaker_Frequency Response - 800 Hz,82.650259,50,90,db,PASS \par \cf4\fs26 3: Full Range Speaker_Frequency Response - 800 Hz = 82.650259 db(50, 90) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_Frequency Response - 1k Hz,82.353214,70,95,db,PASS \par \cf4\fs26 4: Full Range Speaker_Frequency Response - 1k Hz = 82.353214 db(70, 95) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_Frequency Response - 4k Hz,81.112253,70,95,db,PASS \par \cf4\fs26 5: Full Range Speaker_Frequency Response - 4k Hz = 81.112253 db(70, 95) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_Frequency Response - 8k Hz,69.411769,65,95,db,PASS \par \cf4\fs26 6: Full Range Speaker_Frequency Response - 8k Hz = 69.411769 db(65, 95) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_Frequency Response - 12k Hz,65.961294,40,80,db,PASS \par \cf4\fs26 7: Full Range Speaker_Frequency Response - 12k Hz = 65.961294 db(40, 80) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_Frequency Response - 15k Hz,70.540148,40,80,db,PASS \par \cf4\fs26 8: Full Range Speaker_Frequency Response - 15k Hz = 70.540148 db(40, 80) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_Frequency Response - 18k Hz,67.457903,40,80,db,PASS \par \cf4\fs26 9: Full Range Speaker_Frequency Response - 18k Hz = 67.457903 db(40, 80) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:19.162] adb shell fac set_speaker_mute_k18 all off \par 17:38:28 Start Set Speaker Mute all off \par 17:38:28 unmute all \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.264] adb shell fac set_speaker_mute_k18 3 on \par 17:38:28 Start Set Speaker Mute 3 on \par 17:38:28 mute 3 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.389] adb shell fac set_speaker_mute_k18 4 on \par 17:38:28 Start Set Speaker Mute 4 on \par 17:38:28 mute 4 \par 17:38:28 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.523] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.574] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.614] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 FullRange_speaker_FR_THD_1sec.wav: 1 file pushed. 73.5 MB/s (1536060 bytes in 0.020s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.822] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:19.941] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=20 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:28 [v] will set volume to index=32 \par 17:38:28 [v] Connecting to AudioService \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:22.761] adb shell fac play_audio /data/facaud.wav \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:50.524] adb shell fac stop_audio \par 17:38:28 <<<<< OSAL Init \par 17:38:28 MV_Time_Init OK. \par 17:38:28 disp_test.c,main: Start! \par 17:38:28 Create disp service OK \par 17:38:28 Create AMP_Factory Library OK \par 17:38:28 disp_test.c,main: End! \par 17:38:28 \par 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_THD - 1k Hz,3.800803,0.0015,30,%,PASS \par \cf4\fs26 10: Full Range Speaker_THD - 1k Hz = 3.800803 %(0.0015, 30) PASS \par \cf2\fs18 17:38:28 Test Time: 0.000S \par 17:38:28 Full Range Speaker_Balance_Left - 1k Hz,12.368166,0.1,30,db,PASS \par \cf4\fs26 11: Full Range Speaker_Balance_Left - 1k Hz = 12.368166 db(0.1, 30) PASS \par \cf2\fs18 17:38:28 [2021-09-28 17:34:51.471] adb root \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:51.497] adb connect 192.168.100.10:5815 \par 17:38:28 already connected to 192.168.100.10:5815 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:51.524] adb remount \par 17:38:28 remount succeeded \par 17:38:28 \par 17:38:28 1KHz_48K_16bit_left.wav: 1 file pushed. 51.0 MB/s (960044 bytes in 0.018s) \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:51.740] adb shell fac set_speaker_vol 0 0 \par 17:38:28 Start set speaker vol 0 0 \par 17:38:28 \par 17:38:28 [2021-09-28 17:34:51.883] adb shell fac set_media_volume 20 \par 17:38:28 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:34:52.723] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:34:52.851] adb shell fac set_speaker_mute_k18 3 on \par 17:38:29 Start Set Speaker Mute 3 on \par 17:38:29 mute 3 \par 17:38:29 \par 17:38:29 [2021-09-28 17:34:52.960] adb shell fac set_speaker_mute_k18 4 on \par 17:38:29 Start Set Speaker Mute 4 on \par 17:38:29 mute 4 \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=30 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:34:55.702] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:01.132] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Test Time: 10.476S \par 17:38:29 Full Range Speaker_Balance_Right - 1k Hz,12.252228,0.1,30,db,PASS \par \cf4\fs26 12: Full Range Speaker_Balance_Right - 1k Hz = 12.252228 db(0.1, 30) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:01.989] adb root \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:02.017] adb connect 192.168.100.10:5815 \par 17:38:29 already connected to 192.168.100.10:5815 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:02.043] adb remount \par 17:38:29 remount succeeded \par 17:38:29 \par 17:38:29 1KHz_48K_16bit_right.wav: 1 file pushed. 52.5 MB/s (960044 bytes in 0.017s) \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:02.250] adb shell fac set_speaker_vol 0 0 \par 17:38:29 Start set speaker vol 0 0 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:02.389] adb shell fac set_media_volume 20 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:03.404] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:03.535] adb shell fac set_speaker_mute_k18 3 on \par 17:38:29 Start Set Speaker Mute 3 on \par 17:38:29 mute 3 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:03.662] adb shell fac set_speaker_mute_k18 4 on \par 17:38:29 Start Set Speaker Mute 4 on \par 17:38:29 mute 4 \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=30 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:06.490] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:11.763] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Test Time: 10.559S \par 17:38:29 Full Range Speaker_Left to Right Radio,1.009463,0.8,1.2,%,PASS \par \cf4\fs26 13: Full Range Speaker_Left to Right Radio = 1.009463 %(0.8, 1.2) PASS \par \cf2\fs18 17:38:29 Test Time: 0.000S \par 17:38:29 Woofer Speaker_Frequency Response - 100 Hz,85.045745,70,98,db,PASS \par \cf4\fs26 14: Woofer Speaker_Frequency Response - 100 Hz = 85.045745 db(70, 98) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:12.624] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.727] adb shell fac set_speaker_mute_k18 1 on \par 17:38:29 Start Set Speaker Mute 1 on \par 17:38:29 mute 1 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.856] adb shell fac set_speaker_mute_k18 2 on \par 17:38:29 Start Set Speaker Mute 2 on \par 17:38:29 mute 2 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.987] adb root \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.049] adb connect 192.168.100.10:5815 \par 17:38:29 already connected to 192.168.100.10:5815 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.093] adb remount \par 17:38:29 remount succeeded \par 17:38:29 \par 17:38:29 Woofer_speaker_FR_THD_1sec.wav: 1 file pushed. 42.7 MB/s (288060 bytes in 0.006s) \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.277] adb shell fac set_speaker_vol 0 0 \par 17:38:29 Start set speaker vol 0 0 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.425] adb shell fac set_media_volume 20 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=28 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:16.463] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:23.499] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 \par 17:38:29 Test Time: 11.722S \par 17:38:29 Woofer Speaker_Frequency Response - 400 Hz,92.972319,70,98,db,PASS \par \cf4\fs26 15: Woofer Speaker_Frequency Response - 400 Hz = 92.972319 db(70, 98) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:12.624] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.727] adb shell fac set_speaker_mute_k18 1 on \par 17:38:29 Start Set Speaker Mute 1 on \par 17:38:29 mute 1 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.856] adb shell fac set_speaker_mute_k18 2 on \par 17:38:29 Start Set Speaker Mute 2 on \par 17:38:29 mute 2 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.987] adb root \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.049] adb connect 192.168.100.10:5815 \par 17:38:29 already connected to 192.168.100.10:5815 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.093] adb remount \par 17:38:29 remount succeeded \par 17:38:29 \par 17:38:29 Woofer_speaker_FR_THD_1sec.wav: 1 file pushed. 42.7 MB/s (288060 bytes in 0.006s) \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.277] adb shell fac set_speaker_vol 0 0 \par 17:38:29 Start set speaker vol 0 0 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.425] adb shell fac set_media_volume 20 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=28 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:16.463] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:23.499] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 \par 17:38:29 Test Time: 0.000S \par 17:38:29 Woofer Speaker_Frequency Response - 800 Hz,92.682542,70,98,db,PASS \par \cf4\fs26 16: Woofer Speaker_Frequency Response - 800 Hz = 92.682542 db(70, 98) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:12.624] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.727] adb shell fac set_speaker_mute_k18 1 on \par 17:38:29 Start Set Speaker Mute 1 on \par 17:38:29 mute 1 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.856] adb shell fac set_speaker_mute_k18 2 on \par 17:38:29 Start Set Speaker Mute 2 on \par 17:38:29 mute 2 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:12.987] adb root \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.049] adb connect 192.168.100.10:5815 \par 17:38:29 already connected to 192.168.100.10:5815 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.093] adb remount \par 17:38:29 remount succeeded \par 17:38:29 \par 17:38:29 Woofer_speaker_FR_THD_1sec.wav: 1 file pushed. 42.7 MB/s (288060 bytes in 0.006s) \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.277] adb shell fac set_speaker_vol 0 0 \par 17:38:29 Start set speaker vol 0 0 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:13.425] adb shell fac set_media_volume 20 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=28 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:16.463] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:23.499] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 \par 17:38:29 Test Time: 0.000S \par 17:38:29 Woofer Speaker_THD - 400 Hz,1.042702,0.0015,20,%,PASS \par \cf4\fs26 17: Woofer Speaker_THD - 400 Hz = 1.042702 %(0.0015, 20) PASS \par \cf2\fs18 17:38:29 Test Time: 0.000S \par 17:38:29 Woofer Speaker_Balance_Left - 1k Hz,3.828844,0.1,20,db,PASS \par \cf4\fs26 18: Woofer Speaker_Balance_Left - 1k Hz = 3.828844 db(0.1, 20) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:24.472] adb root \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:24.499] adb connect 192.168.100.10:5815 \par 17:38:29 already connected to 192.168.100.10:5815 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:24.526] adb remount \par 17:38:29 remount succeeded \par 17:38:29 \par 17:38:29 1KHz_48K_16bit_left.wav: 1 file pushed. 57.4 MB/s (960044 bytes in 0.016s) \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:24.741] adb shell fac set_speaker_vol 0 0 \par 17:38:29 Start set speaker vol 0 0 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:24.885] adb shell fac set_media_volume 20 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:25.791] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:25.906] adb shell fac set_speaker_mute_k18 1 on \par 17:38:29 Start Set Speaker Mute 1 on \par 17:38:29 mute 1 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:25.985] adb shell fac set_speaker_mute_k18 2 on \par 17:38:29 Start Set Speaker Mute 2 on \par 17:38:29 mute 2 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=28 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:28.672] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:34.016] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Test Time: 10.346S \par 17:38:29 Woofer Speaker_Balance_Right - 1k Hz,3.677222,0.1,20,db,PASS \par \cf4\fs26 19: Woofer Speaker_Balance_Right - 1k Hz = 3.677222 db(0.1, 20) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:34.864] adb root \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:34.891] adb connect 192.168.100.10:5815 \par 17:38:29 already connected to 192.168.100.10:5815 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:34.918] adb remount \par 17:38:29 remount succeeded \par 17:38:29 \par 17:38:29 1KHz_48K_16bit_right.wav: 1 file pushed. 48.6 MB/s (960044 bytes in 0.019s) \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:35.128] adb shell fac set_speaker_vol 0 0 \par 17:38:29 Start set speaker vol 0 0 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:35.290] adb shell fac set_media_volume 20 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:36.287] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:36.409] adb shell fac set_speaker_mute_k18 1 on \par 17:38:29 Start Set Speaker Mute 1 on \par 17:38:29 mute 1 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:36.533] adb shell fac set_speaker_mute_k18 2 on \par 17:38:29 Start Set Speaker Mute 2 on \par 17:38:29 mute 2 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=28 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:39.369] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:44.672] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Test Time: 10.588S \par 17:38:29 Woofer Speaker_Left to Right Radio,1.041233,0.7,1.4,%,PASS \par \cf4\fs26 20: Woofer Speaker_Left to Right Radio = 1.041233 %(0.7, 1.4) PASS \par \cf2\fs18 17:38:29 Test Time: 0.000S \par 17:38:29 Woofer Speaker_Air Leakage Test - 50 Hz,49.981527,48,52,Hz,PASS \par \cf4\fs26 21: Woofer Speaker_Air Leakage Test - 50 Hz = 49.981527 Hz(48, 52) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:45.554] adb shell fac set_speaker_mute_k18 all off \par 17:38:29 Start Set Speaker Mute all off \par 17:38:29 unmute all \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:45.659] adb shell fac set_speaker_mute_k18 1 on \par 17:38:29 Start Set Speaker Mute 1 on \par 17:38:29 mute 1 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:45.790] adb shell fac set_speaker_mute_k18 2 on \par 17:38:29 Start Set Speaker Mute 2 on \par 17:38:29 mute 2 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:45.923] adb root \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:45.986] adb connect 192.168.100.10:5815 \par 17:38:29 already connected to 192.168.100.10:5815 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:46.019] adb remount \par 17:38:29 remount succeeded \par 17:38:29 \par 17:38:29 50Hz_AirLeakageTest.wav: 1 file pushed. 9.6 MB/s (32044 bytes in 0.003s) \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:46.212] adb shell fac set_speaker_vol 0 0 \par 17:38:29 Start set speaker vol 0 0 \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:46.391] adb shell fac set_media_volume 20 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=20 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 \par 17:38:29 [v] will control stream=3 (STREAM_MUSIC) \par 17:38:29 [v] will set volume to index=32 \par 17:38:29 [v] Connecting to AudioService \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:49.714] adb shell fac play_audio /data/facaud.wav \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 Starting: Intent \{ dat=/data/facaud.wav cmp=com.android.gallery3d/.app.MovieActivity \} \par 17:38:29 \par 17:38:29 [2021-09-28 17:35:54.134] adb shell fac stop_audio \par 17:38:29 <<<<< OSAL Init \par 17:38:29 MV_Time_Init OK. \par 17:38:29 disp_test.c,main: Start! \par 17:38:29 Create disp service OK \par 17:38:29 Create AMP_Factory Library OK \par 17:38:29 disp_test.c,main: End! \par 17:38:29 \par 17:38:29 Test Time: 9.395S \par 17:38:29 Mic1_Sensitivity - 100 Hz,39.569271,20,60,mV/Pa,PASS \par \cf4\fs26 22: Mic1_Sensitivity - 100 Hz = 39.569271 mV/Pa(20, 60) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:35:54.999] [2021-09-28 17:35:55.316] Set OK \par 17:38:29 <bst>[2021-09-28 17:35:55.616] Set OK \par 17:38:29 <bst>[2021-09-28 17:35:58.029] adb shell fac set_record_ffv_port on \par 17:38:29 Start record ffv port on \par 17:38:29 7 7 7 7 \par 17:38:29 SUCCESS \par 17:38:29 [2021-09-28 17:35:59.183] adb shell fac set_audio_record ffv 10 \par 17:38:29 Start audio record \par 17:38:29 Capturing sample: 2 ch, 48000 hz, 32 bit \par 17:38:29 Captured 483328 frames \par 17:38:29 [2021-09-28 17:36:10.417] adb push splitwav /data \par 17:38:29 splitwav: 1 file pushed. 4.7 MB/s (11188 bytes in 0.002s) \par 17:38:29 [2021-09-28 17:36:11.478] adb shell chmod 777 /data/splitwav \par 17:38:29 [2021-09-28 17:36:11.603] adb shell /data/splitwav /data/ffv.wav \par 17:38:29 95 07 \par 17:38:29 74 07 \par 17:38:29 bb 07 \par 17:38:29 e5 07 \par 17:38:29 93 07 \par 17:38:29 [2021-09-28 17:36:14.654] adb pull /data/port1.wav ffvtemp1.wav \par 17:38:29 /data/port1.wav: 1 file pulled. 26.1 MB/s (966700 bytes in 0.035s) \par 17:38:29 Test Time: 20.898S \par 17:38:29 Mic2_Sensitivity - 100 Hz,38.720456,20,60,mV/Pa,PASS \par \cf4\fs26 23: Mic2_Sensitivity - 100 Hz = 38.720456 mV/Pa(20, 60) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:15.925] [2021-09-28 17:36:16.243] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:16.544] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:17.955] adb pull /data/port2.wav ffvtemp2.wav \par 17:38:29 /data/port2.wav: 1 file pulled. 40.4 MB/s (966700 bytes in 0.023s) \par 17:38:29 Test Time: 3.267S \par 17:38:29 Mic3_Sensitivity - 100 Hz,39.952448,20,60,mV/Pa,PASS \par \cf4\fs26 24: Mic3_Sensitivity - 100 Hz = 39.952448 mV/Pa(20, 60) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:19.222] [2021-09-28 17:36:19.541] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:19.841] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:21.251] adb pull /data/port3.wav ffvtemp3.wav \par 17:38:29 /data/port3.wav: 1 file pulled. 59.3 MB/s (966700 bytes in 0.016s) \par 17:38:29 Test Time: 3.242S \par 17:38:29 Mic4_Sensitivity - 100 Hz,40.689144,20,60,mV/Pa,PASS \par \cf4\fs26 25: Mic4_Sensitivity - 100 Hz = 40.689144 mV/Pa(20, 60) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:22.495] [2021-09-28 17:36:22.812] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:23.111] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:24.523] adb pull /data/port4.wav ffvtemp4.wav \par 17:38:29 /data/port4.wav: 1 file pulled. 59.9 MB/s (966700 bytes in 0.015s) \par 17:38:29 Test Time: 3.224S \par 17:38:29 Mic1_Sensitivity - 500 Hz,74.957840,40,80,mV/Pa,PASS \par \cf4\fs26 26: Mic1_Sensitivity - 500 Hz = 74.957840 mV/Pa(40, 80) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:25.748] [2021-09-28 17:36:26.066] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:26.367] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:28.778] adb shell fac set_record_ffv_port on \par 17:38:29 Start record ffv port on \par 17:38:29 7 7 7 7 \par 17:38:29 SUCCESS \par 17:38:29 [2021-09-28 17:36:29.915] adb shell fac set_audio_record ffv 10 \par 17:38:29 Start audio record \par 17:38:29 Capturing sample: 2 ch, 48000 hz, 32 bit \par 17:38:29 Captured 483328 frames \par 17:38:29 [2021-09-28 17:36:41.166] adb push splitwav /data \par 17:38:29 splitwav: 1 file pushed. 5.0 MB/s (11188 bytes in 0.002s) \par 17:38:29 [2021-09-28 17:36:42.227] adb shell chmod 777 /data/splitwav \par 17:38:29 [2021-09-28 17:36:42.330] adb shell /data/splitwav /data/ffv.wav \par 17:38:29 b0 05 \par 17:38:29 07 05 \par 17:38:29 19 04 \par 17:38:29 54 05 \par 17:38:29 e0 04 \par 17:38:29 [2021-09-28 17:36:45.233] adb pull /data/port1.wav ffvtemp1.wav \par 17:38:29 /data/port1.wav: 1 file pulled. 46.8 MB/s (966700 bytes in 0.020s) \par 17:38:29 Test Time: 20.853S \par 17:38:29 Mic2_Sensitivity - 500 Hz,67.312824,40,80,mV/Pa,PASS \par \cf4\fs26 27: Mic2_Sensitivity - 500 Hz = 67.312824 mV/Pa(40, 80) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:46.632] [2021-09-28 17:36:46.949] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:47.249] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:48.660] adb pull /data/port2.wav ffvtemp2.wav \par 17:38:29 /data/port2.wav: 1 file pulled. 46.2 MB/s (966700 bytes in 0.020s) \par 17:38:29 Test Time: 3.328S \par 17:38:29 Mic3_Sensitivity - 500 Hz,68.027987,40,80,mV/Pa,PASS \par \cf4\fs26 28: Mic3_Sensitivity - 500 Hz = 68.027987 mV/Pa(40, 80) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:49.989] [2021-09-28 17:36:50.307] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:50.606] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:52.017] adb pull /data/port3.wav ffvtemp3.wav \par 17:38:29 /data/port3.wav: 1 file pulled. 43.2 MB/s (966700 bytes in 0.021s) \par 17:38:29 Test Time: 3.351S \par 17:38:29 Mic4_Sensitivity - 500 Hz,72.484717,40,80,mV/Pa,PASS \par \cf4\fs26 29: Mic4_Sensitivity - 500 Hz = 72.484717 mV/Pa(40, 80) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:53.369] [2021-09-28 17:36:53.687] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:53.986] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:55.398] adb pull /data/port4.wav ffvtemp4.wav \par 17:38:29 /data/port4.wav: 1 file pulled. 37.4 MB/s (966700 bytes in 0.025s) \par 17:38:29 Test Time: 3.396S \par 17:38:29 Mic1_Sensitivity - 1k Hz,28.539912,10,50,mV/Pa,PASS \par \cf4\fs26 30: Mic1_Sensitivity - 1k Hz = 28.539912 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:36:56.794] [2021-09-28 17:36:57.111] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:57.411] Set OK \par 17:38:29 <bst>[2021-09-28 17:36:59.823] adb shell fac set_record_ffv_port on \par 17:38:29 Start record ffv port on \par 17:38:29 7 7 7 7 \par 17:38:29 SUCCESS \par 17:38:29 [2021-09-28 17:37:00.978] adb shell fac set_audio_record ffv 10 \par 17:38:29 Start audio record \par 17:38:29 Capturing sample: 2 ch, 48000 hz, 32 bit \par 17:38:29 Captured 483328 frames \par 17:38:29 [2021-09-28 17:37:12.241] adb push splitwav /data \par 17:38:29 splitwav: 1 file pushed. 3.7 MB/s (11188 bytes in 0.003s) \par 17:38:29 [2021-09-28 17:37:13.309] adb shell chmod 777 /data/splitwav \par 17:38:29 [2021-09-28 17:37:13.428] adb shell /data/splitwav /data/ffv.wav \par 17:38:29 69 fa \par 17:38:29 3e f9 \par 17:38:29 45 f9 \par 17:38:29 68 fa \par 17:38:29 77 fa \par 17:38:29 [2021-09-28 17:37:16.372] adb pull /data/port1.wav ffvtemp1.wav \par 17:38:29 /data/port1.wav: 1 file pulled. 49.7 MB/s (966700 bytes in 0.019s) \par 17:38:29 Test Time: 20.771S \par 17:38:29 Mic2_Sensitivity - 1k Hz,34.925994,10,50,mV/Pa,PASS \par \cf4\fs26 31: Mic2_Sensitivity - 1k Hz = 34.925994 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:17.595] [2021-09-28 17:37:17.912] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:18.213] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:19.624] adb pull /data/port2.wav ffvtemp2.wav \par 17:38:29 /data/port2.wav: 1 file pulled. 41.1 MB/s (966700 bytes in 0.022s) \par 17:38:29 Test Time: 3.252S \par 17:38:29 Mic3_Sensitivity - 1k Hz,34.853790,10,50,mV/Pa,PASS \par \cf4\fs26 32: Mic3_Sensitivity - 1k Hz = 34.853790 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:20.876] [2021-09-28 17:37:21.193] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:21.493] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:22.904] adb pull /data/port3.wav ffvtemp3.wav \par 17:38:29 /data/port3.wav: 1 file pulled. 47.7 MB/s (966700 bytes in 0.019s) \par 17:38:29 Test Time: 3.231S \par 17:38:29 Mic4_Sensitivity - 1k Hz,28.601871,10,50,mV/Pa,PASS \par \cf4\fs26 33: Mic4_Sensitivity - 1k Hz = 28.601871 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:24.136] [2021-09-28 17:37:24.453] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:24.753] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:26.166] adb pull /data/port4.wav ffvtemp4.wav \par 17:38:29 /data/port4.wav: 1 file pulled. 41.8 MB/s (966700 bytes in 0.022s) \par 17:38:29 Test Time: 3.240S \par 17:38:29 Mic1_Sensitivity - 10k Hz,32.042921,10,50,mV/Pa,PASS \par \cf4\fs26 34: Mic1_Sensitivity - 10k Hz = 32.042921 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:27.404] [2021-09-28 17:37:27.722] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:28.023] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:30.433] adb shell fac set_record_ffv_port on \par 17:38:29 Start record ffv port on \par 17:38:29 7 7 7 7 \par 17:38:29 SUCCESS \par 17:38:29 [2021-09-28 17:37:31.595] adb shell fac set_audio_record ffv 10 \par 17:38:29 Start audio record \par 17:38:29 Capturing sample: 2 ch, 48000 hz, 32 bit \par 17:38:29 Captured 483328 frames \par 17:38:29 [2021-09-28 17:37:42.825] adb push splitwav /data \par 17:38:29 splitwav: 1 file pushed. 3.7 MB/s (11188 bytes in 0.003s) \par 17:38:29 [2021-09-28 17:37:43.884] adb shell chmod 777 /data/splitwav \par 17:38:29 [2021-09-28 17:37:43.973] adb shell /data/splitwav /data/ffv.wav \par 17:38:29 35 fd \par 17:38:29 c2 02 \par 17:38:29 a9 fc \par 17:38:29 9a fc \par 17:38:29 71 fa \par 17:38:29 [2021-09-28 17:37:46.953] adb pull /data/port1.wav ffvtemp1.wav \par 17:38:29 /data/port1.wav: 1 file pulled. 50.6 MB/s (966700 bytes in 0.018s) \par 17:38:29 Test Time: 20.756S \par 17:38:29 Mic2_Sensitivity - 10k Hz,26.432168,10,50,mV/Pa,PASS \par \cf4\fs26 35: Mic2_Sensitivity - 10k Hz = 26.432168 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:48.191] [2021-09-28 17:37:48.507] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:48.807] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:50.220] adb pull /data/port2.wav ffvtemp2.wav \par 17:38:29 /data/port2.wav: 1 file pulled. 48.4 MB/s (966700 bytes in 0.019s) \par 17:38:29 Test Time: 3.248S \par 17:38:29 Mic3_Sensitivity - 10k Hz,20.676999,10,50,mV/Pa,PASS \par \cf4\fs26 36: Mic3_Sensitivity - 10k Hz = 20.676999 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:51.467] [2021-09-28 17:37:51.784] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:52.085] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:53.495] adb pull /data/port3.wav ffvtemp3.wav \par 17:38:29 /data/port3.wav: 1 file pulled. 54.4 MB/s (966700 bytes in 0.017s) \par 17:38:29 Test Time: 3.233S \par 17:38:29 Mic4_Sensitivity - 10k Hz,24.548304,10,50,mV/Pa,PASS \par \cf4\fs26 37: Mic4_Sensitivity - 10k Hz = 24.548304 mV/Pa(10, 50) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:54.731] [2021-09-28 17:37:55.048] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:55.348] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:56.759] adb pull /data/port4.wav ffvtemp4.wav \par 17:38:29 /data/port4.wav: 1 file pulled. 51.2 MB/s (966700 bytes in 0.018s) \par 17:38:29 Test Time: 3.241S \par 17:38:29 Mic1_Isolation - 1k Hz,2.707870,0,10,mV/Pa,PASS \par \cf4\fs26 38: Mic1_Isolation - 1k Hz = 2.707870 mV/Pa(0, 10) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:37:58.001] [2021-09-28 17:37:58.317] Set OK \par 17:38:29 <bst>[2021-09-28 17:37:58.617] Set OK \par 17:38:29 <bst>[2021-09-28 17:38:01.030] adb shell fac set_record_ffv_port on \par 17:38:29 Start record ffv port on \par 17:38:29 7 7 7 7 \par 17:38:29 SUCCESS \par 17:38:29 [2021-09-28 17:38:02.159] adb shell fac set_audio_record ffv 10 \par 17:38:29 Start audio record \par 17:38:29 Capturing sample: 2 ch, 48000 hz, 32 bit \par 17:38:29 Captured 483328 frames \par 17:38:29 [2021-09-28 17:38:13.410] adb push splitwav /data \par 17:38:29 splitwav: 1 file pushed. 3.3 MB/s (11188 bytes in 0.003s) \par 17:38:29 [2021-09-28 17:38:14.485] adb shell chmod 777 /data/splitwav \par 17:38:29 [2021-09-28 17:38:14.602] adb shell /data/splitwav /data/ffv.wav \par 17:38:29 57 00 \par 17:38:29 3b 00 \par 17:38:29 4e 00 \par 17:38:29 ad ff \par 17:38:29 61 00 \par 17:38:29 [2021-09-28 17:38:17.598] adb pull /data/port1.wav ffvtemp1.wav \par 17:38:29 /data/port1.wav: 1 file pulled. 56.3 MB/s (966700 bytes in 0.016s) \par 17:38:29 Test Time: 20.804S \par 17:38:29 Mic2_Isolation - 1k Hz,0.108158,0,10,mV/Pa,PASS \par \cf4\fs26 39: Mic2_Isolation - 1k Hz = 0.108158 mV/Pa(0, 10) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:38:18.835] [2021-09-28 17:38:19.152] Set OK \par 17:38:29 <bst>[2021-09-28 17:38:19.452] Set OK \par 17:38:29 <bst>[2021-09-28 17:38:20.865] adb pull /data/port2.wav ffvtemp2.wav \par 17:38:29 /data/port2.wav: 1 file pulled. 47.9 MB/s (966700 bytes in 0.019s) \par 17:38:29 Test Time: 3.228S \par 17:38:29 Mic3_Isolation - 1k Hz,0.294946,0,10,mV/Pa,PASS \par \cf4\fs26 40: Mic3_Isolation - 1k Hz = 0.294946 mV/Pa(0, 10) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:38:22.091] [2021-09-28 17:38:22.407] Set OK \par 17:38:29 <bst>[2021-09-28 17:38:22.708] Set OK \par 17:38:29 <bst>[2021-09-28 17:38:24.119] adb pull /data/port3.wav ffvtemp3.wav \par 17:38:29 /data/port3.wav: 1 file pulled. 50.6 MB/s (966700 bytes in 0.018s) \par 17:38:29 Test Time: 3.248S \par 17:38:29 Mic4_Isolation - 1k Hz,1.273780,0,10,mV/Pa,PASS \par \cf4\fs26 41: Mic4_Isolation - 1k Hz = 1.273780 mV/Pa(0, 10) PASS \par \cf2\fs18 17:38:29 [2021-09-28 17:38:25.368] [2021-09-28 17:38:25.685] Set OK \par 17:38:29 <bst>[2021-09-28 17:38:25.985] Set OK \par 17:38:29 <bst>[2021-09-28 17:38:27.396] adb pull /data/port4.wav ffvtemp4.wav \par 17:38:29 /data/port4.wav: 1 file pulled. 44.1 MB/s (966700 bytes in 0.021s) \par 17:38:29 Test Time: 3.234S \par 17:38:29 Test Result:\tab PASS \par \cf4 17:38:29 Test Result:\tab PASS \par \cf5\fs28 Items[10]:SoundBar Test, [TestTime]:[[253.2]] \par \cf2\fs18 17:38:29 system command: cmd /c TASKKILL /F /IM iperf.exe /T \par \cf4 17:38:29 PASS \par \cf2 17:38:29 Reply from 192.168.100.10: bytes=1024 time=0ms \par 17:38:29 ___________________________________________________ \par 17:38:29 End of The Test Thread, ByeBye! \par 17:38:29 Connecting to FileRecordServer \par 17:38:29 Connect to FileRecordServer ok >>> \par 17:38:29 RECORD:FT2:K18X001.00:PASS:OK \par 17:38:29 Disconnecting to FileRecordServer \par 17:38:29 Disconnect to FileRecordServer ok >>> \par 17:38:29 Delay200Ms \par \cf4 17:38:29 FTP Server LOG Connected OK! \par \cf2 17:38:29 Send Data to SFIS: 135 <== YW10KEG A8934AFE799AA8934AFCF2FABFX-UA300_2020_000000708 QT.19.531.16-20210825 release-keys L09K18FT2001PASS \par 17:38:29 139 <== YW10KEG A8934AFE799AA8934AFCF2FABFX-UA300_2020_000000708 QT.19.531.16-20210825 release-keys L09K18FT2001PASSPASS \par \cf8 17:38:29 YW10KEG A8934AFE799AA8934AFCF2FABFX-UA300_2020_000000708 QT.19.531.16-20210825 release-keys L09K18FT2001PASSPASS \par 17:38:29 YW10KEG A8934AFE799AA8934AFCF2FABFX-UA300_2020_000000708 QT.19.531.16-20210825 release-keys L09K18FTMsg: ATE OK OK Cmd: ATE ? \par \cf1\fs20 Test Completed \par \cf2\fs18 17:38:30 Total Test Time: 256.0 seconds \par \par } PASS_YW10KEG_A8934AFE799A_17_38_30.doc (60,993 bytes)

~~(RD) Fu-chiang Young~~ 2021-10-28 16:25 developer ~0008617	Hi SH, FT2 station brief summary. FT2 engineer had re-tuning test program and add 850Hz within 550Hz detection. It looks more stable to test. Before the station program may not tuning well. Please see the attached picture as spec limit. And before/after tuning analysis data. The following will test for 2K pcs on mass production. Thank you. test spec.jpeg (310,361 bytes) after tuning.png (477,915 bytes) before tuning.png (483,936 bytes)

(ALTech) SH Son 2021-10-29 08:41 developer ~0008624	Hi Fu-chiang Young Please let us know in detail how you did the tuning and upload recording file If it is difficult with text, you can explain it with pictures Thanks SON

~~(RD) Fu-chiang Young~~ 2021-10-29 17:21 developer ~0008631	Hi SH, Here is the test log in excel file as pre-MP build. For the detail tuning on FT2 station, FT2 station engineer will update later and I will update ASAP. Thank you. K18X001.00 FT2 Test value.xls (938,496 bytes)

~~(RD) Fu-chiang Young~~ 2021-11-02 11:28 developer ~0008647	Hi SH, Update the different tuning for FT2 station. Thank you. Difference.docx (259,116 bytes)

(ALTech) SH Son 2021-11-04 09:52 developer ~0008657 Last edited: 2021-11-04 09:53	Hi Fu-chiang Young 0000911:0008631 1. I under review the test result. will let you know the feedback to you within this week (11/5) - change the test criteria, skip the test item. 2. update the air leakage test result. only has 50Hz test result. 0000911:0008647 I understand and agree the measurement algorithm change power spectrum measurement so, please upload the test result for mass production apply update the 850Hz air leakage test. Note. Spectral Measurements (FFT Peak) https://zone.ni.com/reference/en-XX/help/370371K-01/smtlvconcepts/guid-beff79ea-9560-4127-9369-3a27087fa0d6/ power spectrum measurement https://zone.ni.com/reference/en-XX/help/371361R-01/lvanls/power_spectrum_sxx/ Thanks SON

(ALTech) SY Yoon 2021-11-04 11:06 developer ~0008658	HI Ms. Sheila Tu, As I mentioned last week, we are looking for new ferrite core for SPK cable now. We just fix the ferrite core. So we will provided this ferrite core spec. to Dreamus. And they will make data sheet and will provide us. I think we can provide data sheet revision by early of next week.

~~(RD) Fu-chiang Young~~ 2021-11-04 17:05 developer ~0008665	Hi SH, Here is the 200 units test data. The current spec is -68~ -120dB of 850Hz. As the little gap, the spec will fine tune to -78 ~ -120dB. Thank you. K18X001 FT2 Test Value-20211103_ALT.xls (210,944 bytes)

~~(RD) Fu-chiang Young~~ 2021-11-05 15:34 developer	FT2 K18X001 Air Leakage Fail Value_20211103_ALT.xls (46,080 bytes)

~~(RD) Fu-chiang Young~~ 2021-11-05 15:34 developer ~0008675	Hi SH, Update the fail units of air leakage test items. Totally, there are 12 units fail, 4 of 12 units are over spec, 8 of 12 units are under spec. The FATP took apart to FA no. 9, which was -93dB, under spec unit. There was no any abnormal found. So we will fine tune lower spec to -110dB. 4 fail units are under FA and will update the status later. If any comment, please let me know and will inform to FATP. Thank you.

(ALTech) SH Son 2021-11-05 16:26 developer ~0008676	Hi Fu-chiang Young 1. acoustic test criteria change review : Please find the attachment file and review the criteria change and frequency change. and let me know if there's any problems 2. Air leakage test : agree. Please update the next production result including NG case. Thanks SON perMP_K18X001.00 FT2 Test value_ALT Feedback.xls (963,072 bytes)

~~(RD) Fu-chiang Young~~ 2021-11-18 17:56 developer ~0008746	Hi SH, Update the status of FT2 for fail units. PE of FATP had done some FA and found most of them were related to assembly issue. Top issue is 8KHz FR test of full range speaker. Second/third issue are air leakage. As 8KHz FR test, we found the volume table of test FW is lower than ALT FW. Last time we and Lonnie fine tune and measure the speaker power and had defined volume table. But test FW did not push this table so the SPL seemed too low. For Air leakage, the little gap and assembly issue can be screen out NG unit. But FATP suggest us to change spec. We do not allow and will keep the spec, -110~-67dB. Here is the report as reference and next step we will verify 8KHz SPL too low issue and improve the chamber test. Thank you. K18X001.00 FT2 station test fail issue report_11132021_v4-1.pdf (818,740 bytes)

(ALTech) SH Son 2021-11-19 08:29 developer ~0008751	Hi Fu-chiang Young First of all, thank you for detailed update. 1. please let me know the response that test criteria change / some of test item skip. 0000911:0008676 and feedback as your FT2 test fail issue report 2. TOP1: Full Range Speaker_Frequency Response – 8k Hz Check Fail-2 ALT 211119 ] Update the FW and update the result, I'll see the result and decide whether to change the spec 3. Top 2: Woofer Speaker_Air Leakage Test_Pushing - 550 Hz Check Fail-1 ALT 211119 ] good result. also agree change the test spec - test spec from (-110, -67 )dB to (-99, -56)dB Please update the Air Leakage Test test result including PASS/NG. I will review the results and close this topic. Thanks SON

~~(RD) Fu-chiang Young~~ 2021-11-25 18:54 developer ~0008786	Hi SH, The test data will update when PE provides. For 8KHz FR test, we found some problem on FT2 station. We have ask PE to change volume table and retest again to verify the SPL, also even to turn on all speakers to simulate silent room. But the reference microphone just shows 81dBSPL no matter before or after swap volume table and turn on all speakers. So we think FT2 needs to do some calibration for reference microphone and maybe we need to re-define the reference microphone positions. When having new update, we will update soon. Thank you. Reference microphone and distance.jpeg (634,608 bytes) Data value.xls (38,912 bytes)

(ALTech) SH Son 2021-11-26 07:46 developer ~0008789	Hi Fu-chiang ok. please let me know the result after reference MIC calibration. One question about Data value.xls (38,912 byte) - what does push means? After push test value of R/L balance and 550Hz air leakage is higher than before push value. Thanks SON

~~(RD) Fu-chiang Young~~ 2021-11-26 14:56 developer ~0008791	Hi SH, AIr leakage test spec, we do not suggest to change the spec. Because this item has change good program from spectral measuremens(FFT peak) to power spectrum measurement. Our DOE was to screen out little gap and non bushing, we hope to keep the spec[-110, -67]dB. For FT2 station calibration, it has into MP build and FATP cannot allow to do any verify on test station. We cannot do any ALT volume table verify and improve 8KHz volume up. We abort the calibration work. But we think FT2 has worked for over 3K pcs units and the test data can be reference. So the spec of 8KHz FR test will change from (65, 95)dB to (54, 90)dB. Thank you. after tuning-2.png (477,915 bytes) before tuning-2.png (483,936 bytes) Data.xls (36,352 bytes) Good unit.jpeg (172,518 bytes) Good unit.jpeg (172,518 bytes) Little gap unit.jpeg (118,719 bytes) Little gap unit.jpeg (118,719 bytes) non bushing unit.jpeg (197,058 bytes) non bushing unit.jpeg (197,058 bytes)

~~(RD) Fu-chiang Young~~ 2021-12-06 10:50 developer ~0008844	Hi SH, Currently, the fail rate of 8KHz FR test and air leakage test are: 8KHz FR test: FT2001: 10pcs fail/1143=0.87% FT2002: 8pcs fail/1136=0.704% Air leakage fail FT2001: 86pcs fail/1143=7.524% FT2002: 75pcs fail/1136=6.602% Please see the attached file. Thank you. FT2 K18X001 test result value - 20211206.xls (4,108,288 bytes)

(ALTech) SH Son 2021-12-07 14:10 developer ~0008850	Hi Fu-chiang Young OK. thank you for updates. I have one question about Air leakage fail. - Please send detailed defect repair history I want to know that is real defect or not. also which type has the most assembly defects. Thanks SON

~~(RD) Fu-chiang Young~~ 2021-12-07 16:09 developer ~0008852	Hi SH, Another issue for woofer speaker balance test. Please refer the report from FATP. FATP found balance issue if woofer left or right is un-balance with high defect rate: 3.1%. I cannot sure the calculation of left to right is reasonable for balance test due to the IQC woofer speaker spec range is un-known. If it just happen one is USL and the other is LSL of woofer speaker to assemble into the same unit, the FATP will be very confused to FA it. So they require to wider spec range from (0.7, 1.4) to (0.5, 2.5). Or could you require the Dreamus to OQC spec more narrow spec to FXN IQC and it will good for assembly in FATP? Thank you. K18X001.00 FT2 station test fail issue report_v2.pptx.pptx (643,687 bytes)

(ALTech) SH Son 2021-12-08 09:42 developer ~0008857	Hi. Fu-chiang Young I got your point first of all, Spec change (USL, LSL) is not allowed. because the balance difference around 3db. the users can detect unbalance sounds here is action item. 1. measurement the impedance of woofer - 500Hz @ 1Vrms = 3 +/-0.6 ohm if the factory can not measurement speaker impedance, Please let me know. 2. Change the balance frequency. 1KHz to 400Hz : the cut off frequency of SWAN is 450Hz, the DSP(amp board) SW manage the speaker output frequency. Thanks SON

~~(RD) Fu-chiang Young~~ 2021-12-08 10:29 developer ~0008860	Hi SH, 1. measurement the impedance of woofer - 500Hz @ 1Vrms = 3 +/-0.6 ohm if the factory can not measurement speaker impedance, Please let me know. ==>Yes, FATP cannot measure the speaker impedance. 2. Change the balance frequency. 1KHz to 400Hz : the cut off frequency of SWAN is 450Hz, the DSP(amp board) SW manage the speaker output frequency. ==>Ok, I will inform FT2 to change frequency from 1KHz to 400Hz. Thank you.

~~(RD) Fu-chiang Young~~ 2021-12-08 11:45 developer ~0008866	Hi SH, Here is the Dreamus OQC data. In VN Foxconn IQC, they only can measure the size of speaker. So there is no further test data in VN Foxconn IQC. Dreamus OQC data, it seems not to show the all material range. Thank you. OQC report_XX02.pdf (1,441,014 bytes) OQC report_XX03.pdf (1,477,347 bytes)

(ALTech) SH Son 2021-12-08 12:49 developer ~0008867	Hi Fu-chiang Young Ok. the Dreamus OQC data is measurement the speaker impedance. but the sampling not to all. Please let me know the change the balance frequency result. -> 1KHz to 400Hz Thanks SON

~~(RD) Fu-chiang Young~~ 2021-12-08 16:31 developer ~0008873	Hi SH, For Woofer Speaker_Balance_Left - 1k Hz (0.1, 20), Woofer Speaker_Balance_Right - 1k Hz (0.1, 20) will change to Woofer Speaker_Balance_Left - 400 Hz (0.1, 20), Woofer Speaker_Balance_Right - 400 Hz (0.1, 20). Will the spec need to change or keep at (0.1, 20)? Thank you.

(ALTech) SH Son 2021-12-09 09:35 developer ~0008883	HI Fu-chiang Young Please keep the test spec. (0.1, 20). one question, What is the unit of Speaker_Balance R/L result? -DB? SPL? or % Thanks SON

~~(RD) Fu-chiang Young~~ 2021-12-09 09:44 developer ~0008884	Hi SH, Woofer Speaker_Left to Right Radio (0.7, 1.4) = Woofer Speaker_Balance_Left - 1k Hz (0.1, 20) / Woofer Speaker_Balance_Right - 1k Hz (0.1, 20) Have any suggestion for correct calculation for balance? Thank you.

~~(RD) Fu-chiang Young~~ 2021-12-09 16:08 developer ~0008887	Hi SH, Sorry my misunderstanding. As in wechet discussed, the summary is as below: So in summary of balance test. measure the power spectrum [Vrms^2] R/L, and calculate the R/L ratio Upload the 400Hz and 1KHz power spectrum as reference. We will keep tracking 400Hz woofer balance test. Thank you. 1KHz woofer balance.png (320,314 bytes) 400Hz woofer balance.png (325,823 bytes)

~~(RD) Fu-chiang Young~~ 2021-12-10 09:37 developer ~0008895	Hi SH, FATP provides the verify test data for changing woofer balance from 1KHz to 400Hz. It looks good for the test. Please refer the test data as attached file. Thank you. K18X001 Verify new test program V4.8.xls (40,960 bytes)

(ALTech) SH Son 2021-12-10 11:08 developer ~0008897	HI Fu-chiang Young Good result. Please apply on mass production and let me know the data of 100 pcs Thanks SON

~~(RD) Fu-chiang Young~~ 2021-12-30 17:12 developer ~0009180	Hi SH, Update the test data for 100 pcs. Thank you. K18X001.00 100pcs FT2 pass DUT data.xlsx (35,039 bytes)

~~(RD) Fu-chiang Young~~ 2021-12-30 17:19 developer ~0009181	Hi SH, Another issue of woofer balance left/right on chamber happens during the test. They can retest pass on fail DUT. It seems not stable, but cannot tell speaker/amp board issue or test station issue. Check the test log, found the wav of 400 Hz for woofer balance test is only 1 second to play. Also check the woofer FR test, they played 2 seconds and not under 80dBSPL issue. We will change the wav file for 2 seconds and try to verify again. Update the issue report. Thank you. K18X001.00 FT2 station SOU17, SOU18 fail issue report.pptx (182,706 bytes)

(ALTech) SH Son 2022-01-05 14:48 developer ~0009203	Hi Fu-chiang Young 0000911:0009180 the test result of changing woofer balance from 1KHz to 400Hz is good. Please let me know the defect rate. 0000911:0009181 please update the 2 seconds wav file test. at this time can not agree test spec. Thanks SON

~~(RD) Fu-chiang Young~~ 2022-01-05 16:21 developer	Woofer balance test spec.png (273,477 bytes)

~~(RD) Fu-chiang Young~~ 2022-01-05 16:21 developer ~0009205	Hi SH, 0000911:0009180 the test result of changing woofer balance from 1KHz to 400Hz is good. Please let me know the defect rate. ==>Below is the reply: 1. MO mass production322pcs from 2021/12/24 to 2021/12/25 find out 7pcs error code SOU17: Woofer speaker balance left _400Hz, with defect rate 7/322=2.17% 2. MO mass production322pcs from 2021/12/24 to 2021/12/25 find out 12pcs error code SOU018: Woofer speaker balance right _400Hz, with defect rate 12/322=3.72% 0000911:0009181 please update the 2 seconds wav file test. at this time can not agree test spec. ==>Yes, we have solved this issue when changed 2 seconds wav file. We will keep the same spec (80, 120)dBSPL. Thank you.

(ALTech) SH Son 2022-01-13 08:40 developer ~0009335	HI Fu-chiang Young I think almost issue clear about acoustic chamber. and some optimization if needed. So please submit the finalize report. because the NER was paid by ALT for the acoustic chamber equipment and program the report included below - equipment list with detail photo : Includes size and weight information - Test software - update document : the test item list and test time (update the below comment) 0000911:0007580 : test video (acoustic test start to end) if you have any question, please let me know Thanks SON

~~(RD) Fu-chiang Young~~ 2022-02-11 09:17 developer ~0009432	Hi SH, The finalize report replies late. Update the report. Thank you. K18X001 Acoustic Chamber Test Report_V1.2.pptx (7,758,598 bytes)

~~(RD) Fu-chiang Young~~ 2022-02-11 09:20 developer ~0009433	Hi SH, Update the video for chamber test with unit. Thank you. 1643279024735746.mp4 (101,315,058 bytes) 1643279024735746.mp4 (101,315,058 bytes)

(ALTech) SH Son 2022-02-11 14:59 developer ~0009438 Last edited: 2022-02-11 15:01	Hi Fu-chiang Young Please update the below. 1. test report of acoustic chamber "Sound insulation effect" - I think the vender already tested it before shipment. 2. actual overall weight. Not estimate. 3. the equipment list in excel file - I attached! 4. Test SW is MISSING. 4.1 also update the license key - Labview - NI Sound & Vibration Toolkit 5. acoustic chamber inside video (acoustic test start to end) - I want to check acoustic chamber inside movement during test. 6. acoustic chamber vender contact point if you have any question, please let me know Thanks SON equipment list.xlsx (10,673 bytes)

~~(RD) Fu-chiang Young~~ 2022-02-14 10:26 developer ~0009441	Hi SH, We will inform PE to prepare all the report. Thank you.

~~(RD) Fu-chiang Young~~ 2022-02-17 18:21 developer ~0009467	Hi SH, Update the equipment list. Thank you. equipment list_V1.1.xlsx (1,077,797 bytes)

(ALTech) SH Son 2022-02-18 09:04 developer ~0009471	Hi Fu-chiang Young The equipment list updated but the others is not update yet. Please update the others 1. test report of acoustic chamber "Sound insulation effect" - I think the vender already tested it before shipment. 2. actual overall weight. Not estimate. 3. the equipment list in excel file - : updated 0000911:0009467 4. Test SW is MISSING. 4.1 also update the license key - Labview - NI Sound & Vibration Toolkit 5. acoustic chamber inside video (acoustic test start to end) - I want to check acoustic chamber inside movement during test. 6. acoustic chamber vender contact point if you have any question, please let me know Thanks SON

~~(RD) Fu-chiang Young~~ 2022-02-22 11:53 developer ~0009485	Hi SH, Update point 1: 1. test report of acoustic chamber "Sound insulation effect" - I think the vender already tested it before shipment. As attached file. For 6. acoustic chamber vender contact point, what is this? Thank you. Acoustic Chamber Testing Report_Consolidation.pdf (396,882 bytes)

(ALTech) SH Son 2022-02-22 14:14 developer ~0009486	Hi Fu-chiang Young 0000911:0009485 thank you for update. first of all, This is the testing report for the 1st acoustic chamber - chamber serial number : OTT AI Soundbar Tester20210915 ALT was paid for total two of acoustic chamber. So please check and update the testing report for the 2nd acoustic chamber For 6. acoustic chamber vender contact point, Please answer the below - company name and homepage : contact person name : email address : phone number : Thanks SON

~~(RD) Fu-chiang Young~~ 2022-02-22 15:59 developer ~0009488	Hi SH, 2nd chamber report is applying, will update soon. For 6. acoustic chamber vender contact point, Please answer the below - company name and homepage : Booster Electronics Technology Co,LTD, home page: www.boostertech.cn contact person name : Carmen Long (Project Management) email address : carmen.long@bcd-autotest.com phone number : (+86) 198-2033-1504 Thank you.

~~(RD) Fu-chiang Young~~ 2022-03-01 16:40 developer ~0009516	Hi SH, Below is the update. Thank you. 1. test report of acoustic chamber "Sound insulation effect" - I think the vender already tested it before shipment. ==>Update the 2nd chamber report. 2. actual overall weight. Not estimate. ==>Update into report. 3. the equipment list in excel file - : updated 0000911:0009467 ==>Provided. 4. Test SW is MISSING. 4.1 also update the license key - Labview - NI Sound & Vibration Toolkit ==>Need to confirm with Sales and PM for SW buying proposal. 5. acoustic chamber inside video (acoustic test start to end) - I want to check acoustic chamber inside movement during test. ==>Update the video inside the chamber during testing. 6. acoustic chamber vender contact point ==>Update into report. Chamber inside during test.mp4 (21,235,620 bytes) Chamber inside during test.mp4 (21,235,620 bytes) Acoustic Chamber Testing Report_Consolidation20210720.pdf (397,219 bytes) K18X001 Acoustic Chamber Test Report_V1.3.pptx (7,760,694 bytes)

(ALTech) SH Son 2022-03-02 10:43 developer ~0009522	Hi Fu-chiang Young I have question about chamber test report - Acoustic Chamber Testing Report_Consolidation20210720.pdf (397,219 bytes) - Acoustic Chamber Testing Report_Consolidation.pdf (396,882 bytes) I wonder why the background noise measurement criteria are different. Consolidation20210720.pdf is measured 20~10KHz background noise but Consolidation.pdf (396,882 bytes) is measured 1~500Hz background noise Please check and let me know and about this 4. Test SW is MISSING. 4.1 also update the license key - Labview - NI Sound & Vibration Toolkit ==>Need to confirm with Sales and PM for SW buying proposal. ==>>[ALT] please check FII proposal. it is included Test SW and Labview and NI Sound toolkit. 0000911:0004361 Thanks SON 이미지 1082.png (193,369 bytes) 이미지 1082.png (193,369 bytes)

~~(RD) Fu-chiang Young~~ 2022-03-02 17:08 developer ~0009529	Hi SH, Update the NI serial number into report. NI serial number: H21M50456 The chamber report will be provided later from vendor. Thank you. NI Serial Number.png (4,568 bytes) NI Serial Number.png (4,568 bytes) K18X001 Acoustic Chamber Test Report_V1.3-2.pptx (7,775,746 bytes)

~~(RD) Fu-chiang Young~~ 2022-03-02 18:11 developer ~0009530	Hi SH, I have question about chamber test report - Acoustic Chamber Testing Report_Consolidation20210720.pdf (397,219 bytes) - Acoustic Chamber Testing Report_Consolidation.pdf (396,882 bytes) I wonder why the background noise measurement criteria are different. Consolidation20210720.pdf is measured 20~10KHz background noise but Consolidation.pdf (396,882 bytes) is measured 1~500Hz background noise Please check and let me know Vendor reply ==> Acoustic Chamber Testing Report_Consolidation.pdf : 20~20KHz(#2 chamber) Acoustic Chamber Testing Report_Consolidation20210720.pdf. : 20~10KHz(#1 chamber) That is really different. The #1 chamber did not measure well as 20~20KHz. But #2 chamber did 20~20KHz full range measurement. The chambers are all shipped out to VN production line and cannot measure it again. The vendor said background noise value are almost the same. Thank you. Chamber 1 and Chamber 2 range.png (231,158 bytes) Chamber 1 and Chamber 2 range.png (231,158 bytes)

(ALTech) SH Son 2022-03-03 08:47 developer ~0009531 Last edited: 2022-03-03 08:48	Hi Fu-chiang Young 0000911:0009529 thank you for update. but, my understanding is that the LabVIEW license is required for each device. Please check the serial key you provided can be used on both chamber. 0000911:0009530 I checked background noise value are almost the same until 500Hz. I am not asking for a re-measurement, My question was why #2 chamber not measured full range? Is there any special reason? Thanks SON

(ALTech) SH Son 2022-03-11 08:21 developer ~0009584	Hi Fu-chiang Young I update the list. Please update No.4 and 4.1 1. test report of acoustic chamber "Sound insulation effect" => done Acoustic Chamber Testing Report_Consolidation.pdf (396,882 bytes) 0000911:0009485 Acoustic Chamber Testing Report_Consolidation20210720.pdf (397,219 bytes) 0000911:0009516 2. actual overall weight. Not estimate. => done K18X001 Acoustic Chamber Test Report_V1.3.pptx (7,760,694 bytes) 0000911:0009516 3. the equipment list in excel file - : updated 0000911:0009467 => done 0000911:0009467 4. Test SW is MISSING. Need to update 4.1 also update the license key - NI Sound & Vibration Toolkit Need to update. 1 of 2 key is updated 0000911:0009529 5. acoustic chamber inside video (acoustic test start to end) => done 0000911:0009433 1643279024735746.mp4 (101,315,058 bytes) 0000911:0009516 Chamber inside during test.mp4 (21,235,620 bytes) 6. acoustic chamber vender contact point => done - company name and homepage : Booster Electronics Technology Co,LTD, home page: www.boostertech.cn contact person name : Carmen Long (Project Management) email address : carmen.long@bcd-autotest.com phone number : (+86) 198-2033-1504 if you have any question, please let me know Thanks SON

~~(RD) Fu-chiang Young~~ 2022-03-18 14:04 developer	OTT_Test.7z (49,899,115 bytes) OTT SourceCode20220104_V4.9.zip (64,570,630 bytes)

~~(RD) Fu-chiang Young~~ 2022-03-18 14:04 developer ~0009647	Hi SH, Update #4 item. 4. Test SW is MISSING. Need to update ==>OTT_Test.7z (Test software) ==>OTT SourceCode20220104_V4.9.zip (source code) 4.1 also update the license key - NI Sound & Vibration Toolkit Need to update. 1 of 2 key is updated 0000911:0009529 ==>will update end of March. Thank you.

~~(RD) Fu-chiang Young~~ 2022-04-06 08:56 developer ~0009798	Hi SH, Sorry for update late for NI serial number. Please see the attached file. Thank you. NI Serial Number-2.png (9,247 bytes) NI Serial Number-2.png (9,247 bytes)

~~(RD) Fu-chiang Young~~ 2022-04-17 13:55 developer ~0009893	Hi SH, Sorry for replied late for NI license activation. Please see the attached files. Thank you. chamber-1.zip (718,955 bytes) chamber-2.zip (823,535 bytes)

(ALTech) SH Son 2022-04-18 09:24 developer ~0009894	Thank you for the update. I'll ask if you have any questions Thanks SON

~~(RD) Fu-chiang Young~~ 2022-08-17 16:01 developer ~0010646	Hi SH, For acoustic issue all had been solved, so it will close the issue. Thank you.

Date Modified	Username	Field	Change
2020-09-03 14:14	(ALTech) SH Son	New Issue
2020-09-03 14:16	(ALTech) SH Son	File Added: SWAN Acoustic Test Requirement for Mass Production_V0.1.pdf
2020-09-03 14:16	(ALTech) SH Son	Assigned To	=> (PM) Henry Chiou
2020-09-03 14:16	(ALTech) SH Son	Status	new => assigned
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (ALTech) BY Lee
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (ALTech) JW Kim
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (ALTech) Lonnie Kim
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (ALTech) SH Son
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (ALTech) SY Yoon
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (HW) Sean Chiang
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (HW) Tom Lee
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (PM) Henry Chiou
2020-09-03 14:17	(ALTech) SH Son	Issue Monitored: (PM) Tiffanie Lai
2020-09-03 14:17	(ALTech) SH Son	Relationship added	related to 0000840
2020-09-04 15:07	~~(PM) Henry Chiou~~	Note Added: 0004237
2020-09-07 14:55	(ALTech) SH Son	Note Added: 0004251
2020-09-11 15:59	~~(PM) Henry Chiou~~	File Added: AI Soundbar Test Proposal (V03)(1).pdf
2020-09-11 15:59	~~(PM) Henry Chiou~~	Note Added: 0004311
2020-09-14 15:51	(ALTech) SH Son	Note Added: 0004327
2020-09-16 17:44	~~(PM) Henry Chiou~~	File Added: AI Soundbar Test Proposal (V04).pdf
2020-09-16 17:44	~~(PM) Henry Chiou~~	File Added: PM4163.pdf
2020-09-16 17:44	~~(PM) Henry Chiou~~	File Added: PM4163.xlsx
2020-09-16 17:44	~~(PM) Henry Chiou~~	Note Added: 0004361
2020-09-16 17:44	~~(PM) Henry Chiou~~	Note Edited: 0004361
2020-09-22 16:09	(ALTech) SH Son	File Added: Acoustic chamber_referance.png
2020-09-22 16:09	(ALTech) SH Son	Note Added: 0004421
2020-11-03 14:41	~~(PM) Henry Chiou~~	File Added: AI Soundbar Test chamber Proposal v03(1).pdf
2020-11-03 14:41	~~(PM) Henry Chiou~~	Note Added: 0004840
2020-11-04 14:04	(ALTech) SH Son	File Added: SWAN Acoustic Test chamber.pptx
2020-11-04 14:04	(ALTech) SH Son	Note Added: 0004857
2020-11-04 15:40	~~(PM) Henry Chiou~~	Note Added: 0004863
2020-11-09 13:54	(ALTech) SH Son	Note Added: 0004901
2020-11-13 11:08	(SW) Jacky Chiang	Project	T99X171.00 SKB Eagle => K18X001.00 SKB SWAN
2020-12-24 20:46	~~(PM) Henry Chiou~~	Note Added: 0005607
2020-12-28 11:57	(ALTech) SH Son	Note Added: 0005628
2020-12-28 21:49	(HW) Sean Chiang	Note Added: 0005639
2021-01-20 10:44	(ALTech) SH Son	Relationship added	related to 0001126
2021-04-07 19:42	~~(PM) Henry Chiou~~	File Added: AI Soundbar Tester Modification Proposal 0407.pdf
2021-04-07 19:42	~~(PM) Henry Chiou~~	Note Added: 0006620
2021-04-08 09:09	(ALTech) SH Son	Note Added: 0006626
2021-04-13 16:03	(ALTech) SH Son	Note Added: 0006689
2021-04-14 15:21	~~(PM) Henry Chiou~~	Note Added: 0006709
2021-04-19 14:27	~~(PM) Henry Chiou~~	File Added: CPK_FT2-K18X001_67pcs.xls
2021-04-19 14:27	~~(PM) Henry Chiou~~	Note Added: 0006761
2021-04-29 15:31	(ALTech) SH Son	Issue Monitored: (ALTech) Sophie Lee
2021-04-29 15:32	(ALTech) SH Son	Note Added: 0006946
2021-05-04 15:02	~~(PM) Henry Chiou~~	Issue Monitored: (PM) Dennis Lu
2021-05-04 19:56	~~(PM) Henry Chiou~~	Note Added: 0006992
2021-05-24 23:37	(HW) Sean Chiang	Issue Monitored: (ALTech) Philip
2021-05-25 00:03	(HW) Sean Chiang	File Added: Production capability of acoustic chamber.pptx
2021-05-25 00:03	(HW) Sean Chiang	Note Added: 0007218
2021-05-25 00:04	(HW) Sean Chiang	Issue Monitored: (RD) Fu-chiang Young
2021-05-25 08:31	~~(ALTech) Sun Choul Joung~~	Issue Monitored: (ALTech) Sun Choul Joung
2021-05-25 12:42	(ALTech) SH Son	Assigned To	(PM) Henry Chiou => (HW) Sean Chiang
2021-06-02 10:04	(ALTech) SH Son	File Added: Production capability of acoustic chamber _ALT Feedback.xlsx
2021-06-02 10:04	(ALTech) SH Son	Note Added: 0007328
2021-06-02 10:23	(ALTech) SH Son	Note View State: 0007328: private
2021-06-02 10:23	(ALTech) SH Son	File Added: Production capability of acoustic chamber _ALT Feedback_v1.xlsx
2021-06-02 10:23	(ALTech) SH Son	Note Added: 0007331
2021-06-02 10:29	(ALTech) SH Son	Note View State: 0007331: private
2021-06-02 10:29	(ALTech) SH Son	File Added: Production capability of acoustic chamber _ALT Feedback_v2.xlsx
2021-06-02 10:29	(ALTech) SH Son	Note Added: 0007333
2021-06-04 02:04	(HW) Sean Chiang	File Added: Production capability of acoustic chamber_0603.pptx
2021-06-04 02:04	(HW) Sean Chiang	Note Added: 0007355
2021-06-04 09:45	(ALTech) SH Son	Note Added: 0007361
2021-06-08 21:34	(HW) Sean Chiang	File Added: Production capability of acoustic chamber _ALT Feedback_v4.xlsx
2021-06-08 21:34	(HW) Sean Chiang	Note Added: 0007398
2021-06-09 09:45	(ALTech) SH Son	Note Added: 0007401
2021-06-09 11:59	(ALTech) Lonnie Kim	File Added: Production capability of acoustic chamber _ALT Feedback_v4_0609.xlsx
2021-06-09 11:59	(ALTech) Lonnie Kim	Note Added: 0007404
2021-06-09 15:57	(HW) Sean Chiang	Note Added: 0007411
2021-06-10 12:46	(HW) Sean Chiang	File Added: Production capability of acoustic chamber _test procedure_0609.xlsx
2021-06-10 12:46	(HW) Sean Chiang	Note Added: 0007427
2021-06-15 13:53	~~(RD) Fu-chiang Young~~	Note Added: 0007464
2021-06-16 20:36	(HW) Sean Chiang	File Added: Production capability of acoustic chamber _test procedure_0615.xlsx
2021-06-16 20:36	(HW) Sean Chiang	Note Added: 0007479
2021-06-17 09:34	(ALTech) SH Son	File Added: Production capability of acoustic chamber _test procedure_0615_alt feedback.xlsx
2021-06-17 09:34	(ALTech) SH Son	Note Added: 0007481
2021-06-18 15:41	(HW) Sean Chiang	Note Added: 0007500
2021-06-18 15:42	(HW) Sean Chiang	Assigned To	(HW) Sean Chiang => (RD) Fu-chiang Young
2021-06-21 22:24	(HW) Sean Chiang	File Added: Production capability of acoustic chamber _test procedure_0621_alt feedback.xlsx
2021-06-21 22:24	(HW) Sean Chiang	Note Added: 0007512
2021-06-22 19:18	~~(RD) Fu-chiang Young~~	File Added: Production capability of acoustic chamber _test procedure_0622_FII feedback.xlsx
2021-06-22 19:18	~~(RD) Fu-chiang Young~~	File Added: speaker test wavefile_updated_0607.zip
2021-06-22 19:18	~~(RD) Fu-chiang Young~~	File Added: 20210615-equipment.zip
2021-06-22 19:18	~~(RD) Fu-chiang Young~~	Note Added: 0007522
2021-06-22 19:31	(ALTech) SY Yoon	Note Added: 0007524
2021-06-23 10:04	(ALTech) SH Son	Note Added: 0007532
2021-06-23 13:51	(HW) Sean Chiang	Note Added: 0007535
2021-06-26 22:34	~~(RD) Fu-chiang Young~~	File Added: OTT AI 隔音箱组件(1)(1).STEP
2021-06-26 22:34	~~(RD) Fu-chiang Young~~	Note Added: 0007559
2021-06-28 11:24	~~(RD) Fu-chiang Young~~	Note View State: 0007559: private
2021-06-28 11:25	~~(RD) Fu-chiang Young~~	Note Edited: 0007559
2021-06-28 11:28	~~(RD) Fu-chiang Young~~	Note Edited: 0007559
2021-06-28 11:28	~~(RD) Fu-chiang Young~~	Note View State: 0007559: public
2021-06-28 16:31	(ALTech) SH Son	Note Added: 0007565
2021-06-29 19:03	(HW) Sean Chiang	File Added: K18X001.00 FT2 Each station working time.xlsx
2021-06-29 19:03	(HW) Sean Chiang	Note Added: 0007580
2021-07-06 09:47	(ALTech) SH Son	Note Added: 0007609
2021-07-08 08:10	(ALTech) SH Son	Note Added: 0007624
2021-07-09 20:51	(HW) Sean Chiang	File Added: K18_2154002956.zip
2021-07-09 20:51	(HW) Sean Chiang	Note Added: 0007644
2021-07-12 08:28	(ALTech) SH Son	Note Added: 0007645
2021-07-13 06:56	~~(RD) Fu-chiang Young~~	File Added: K18X001.00 FT2 Fail item.xls
2021-07-13 06:56	~~(RD) Fu-chiang Young~~	Note Added: 0007661
2021-07-26 10:40	~~(RD) Fu-chiang Young~~	File Added: CPK_K18X001.xls
2021-07-26 10:40	~~(RD) Fu-chiang Young~~	Note Added: 0007731
2021-08-02 12:34	~~(RD) Fu-chiang Young~~	File Added: BFX_UA300_MIC sealing test_20210730.pdf
2021-08-02 12:34	~~(RD) Fu-chiang Young~~	Note Added: 0007780
2021-08-06 16:22	(ALTech) SH Son	Note Added: 0007828
2021-08-06 16:25	(ALTech) SH Son	File Added: Swan_soundbar_sound_leackage_review.pdf
2021-08-06 16:25	(ALTech) SH Son	Note Added: 0007829
2021-08-06 16:31	(ALTech) SH Son	Note View State: 0007829: private
2021-08-06 16:31	(ALTech) SH Son	File Added: Swan_soundbar_sound_leackage_review_v1.pdf
2021-08-06 16:31	(ALTech) SH Son	Note Added: 0007830
2021-08-11 10:20	(ALTech) SH Son	Note Added: 0007842
2021-08-11 12:33	(HW) Sean Chiang	Note Added: 0007844
2021-08-12 17:35	(HW) Sean Chiang	File Added: air leakage test environment setup.PNG
2021-08-12 17:35	(HW) Sean Chiang	Note Added: 0007856
2021-08-12 17:48	(ALTech) SH Son	Note Added: 0007857
2021-08-12 18:12	(HW) Sean Chiang	Note Added: 0007859
2021-08-12 20:55	(HW) Sean Chiang	Note Added: 0007862
2021-08-13 16:38	(ALTech) SH Son	Note Added: 0007866
2021-08-13 20:52	(HW) Sean Chiang	File Added: air leakage test block diagram.PNG
2021-08-13 20:52	(HW) Sean Chiang	Note Added: 0007869
2021-08-17 10:40	(ALTech) SH Son	Note Added: 0007876
2021-08-17 14:32	(HW) Sean Chiang	Note Added: 0007877
2021-09-23 15:17	~~(RD) Fu-chiang Young~~	File Added: air leakage test_20210923.pdf
2021-09-23 15:17	~~(RD) Fu-chiang Young~~	Note Added: 0008268
2021-09-23 23:25	(ALTech) SH Son	Note Added: 0008271
2021-09-24 18:06	~~(RD) Fu-chiang Young~~	File Added: Bushing-OK_ALT_50Hz_20210924101914.wav
2021-09-24 18:06	~~(RD) Fu-chiang Young~~	File Added: non-bushing-ALT_50Hz_20210924150629.wav
2021-09-24 18:06	~~(RD) Fu-chiang Young~~	File Added: non-bushing-ALT_50Hz_20210924151107.wav
2021-09-24 18:06	~~(RD) Fu-chiang Young~~	Note Added: 0008287
2021-09-27 16:02	(ALTech) SH Son	File Added: 이미지 360.png
2021-09-27 16:02	(ALTech) SH Son	File Added: 이미지 359.png
2021-09-27 16:02	(ALTech) SH Son	Note Added: 0008307
2021-09-27 16:10	(ALTech) SH Son	Note Edited: 0008307
2021-10-04 15:29	~~(RD) Fu-chiang Young~~	Note Added: 0008365
2021-10-05 08:11	(ALTech) SH Son	Note Added: 0008368
2021-10-05 14:33	~~(RD) Fu-chiang Young~~	File Added: 5 units test.jpeg
2021-10-05 14:33	~~(RD) Fu-chiang Young~~	Note Added: 0008373
2021-10-05 15:44	(ALTech) SH Son	Note Added: 0008375
2021-10-05 15:57	~~(RD) Fu-chiang Young~~	File Added: 50Hz Record file.zip
2021-10-05 15:57	~~(RD) Fu-chiang Young~~	Note Added: 0008377
2021-10-07 21:00	~~(RD) Fu-chiang Young~~	File Added: FT2 Data_20211007.7z
2021-10-07 21:00	~~(RD) Fu-chiang Young~~	Note Added: 0008410
2021-10-13 17:52	(ALTech) SH Son	Note Added: 0008442
2021-10-14 16:25	~~(RD) Fu-chiang Young~~	File Added: PASS_YW10L1B_A8934AFE796C_16_33_42.doc
2021-10-14 16:25	~~(RD) Fu-chiang Young~~	Note Added: 0008456
2021-10-19 16:23	~~(RD) Fu-chiang Young~~	File Added: K18X001_1910.zip
2021-10-19 16:23	~~(RD) Fu-chiang Young~~	Note Added: 0008495
2021-10-21 09:09	(ALTech) SH Son	File Added: fr-spk.BMP
2021-10-21 09:09	(ALTech) SH Son	Note Added: 0008518
2021-10-21 09:13	(ALTech) SH Son	Note Added: 0008519
2021-10-26 13:52	(ALTech) SH Son	Note Added: 0008585
2021-10-28 13:51	(HW) Sean Chiang	File Added: PASS_YW10KEG_A8934AFE799A_17_38_30.doc
2021-10-28 13:51	(HW) Sean Chiang	Note Added: 0008613
2021-10-28 16:25	~~(RD) Fu-chiang Young~~	File Added: test spec.jpeg
2021-10-28 16:25	~~(RD) Fu-chiang Young~~	File Added: after tuning.png
2021-10-28 16:25	~~(RD) Fu-chiang Young~~	File Added: before tuning.png
2021-10-28 16:25	~~(RD) Fu-chiang Young~~	Note Added: 0008617
2021-10-29 08:41	(ALTech) SH Son	Note Added: 0008624
2021-10-29 17:21	~~(RD) Fu-chiang Young~~	File Added: K18X001.00 FT2 Test value.xls
2021-10-29 17:21	~~(RD) Fu-chiang Young~~	Note Added: 0008631
2021-11-02 11:28	~~(RD) Fu-chiang Young~~	File Added: Difference.docx
2021-11-02 11:28	~~(RD) Fu-chiang Young~~	Note Added: 0008647
2021-11-04 09:52	(ALTech) SH Son	Note Added: 0008657
2021-11-04 09:53	(ALTech) SH Son	Note Edited: 0008657
2021-11-04 11:06	(ALTech) SY Yoon	Note Added: 0008658
2021-11-04 17:05	~~(RD) Fu-chiang Young~~	File Added: K18X001 FT2 Test Value-20211103_ALT.xls
2021-11-04 17:05	~~(RD) Fu-chiang Young~~	Note Added: 0008665
2021-11-05 15:34	~~(RD) Fu-chiang Young~~	File Added: FT2 K18X001 Air Leakage Fail Value_20211103_ALT.xls
2021-11-05 15:34	~~(RD) Fu-chiang Young~~	Note Added: 0008675
2021-11-05 16:26	(ALTech) SH Son	File Added: perMP_K18X001.00 FT2 Test value_ALT Feedback.xls
2021-11-05 16:26	(ALTech) SH Son	Note Added: 0008676
2021-11-18 17:56	~~(RD) Fu-chiang Young~~	File Added: K18X001.00 FT2 station test fail issue report_11132021_v4-1.pdf
2021-11-18 17:56	~~(RD) Fu-chiang Young~~	Note Added: 0008746
2021-11-19 08:29	(ALTech) SH Son	Note Added: 0008751
2021-11-25 18:54	~~(RD) Fu-chiang Young~~	File Added: Reference microphone and distance.jpeg
2021-11-25 18:54	~~(RD) Fu-chiang Young~~	File Added: Data value.xls
2021-11-25 18:54	~~(RD) Fu-chiang Young~~	Note Added: 0008786
2021-11-26 07:46	(ALTech) SH Son	Note Added: 0008789
2021-11-26 14:56	~~(RD) Fu-chiang Young~~	File Added: after tuning-2.png
2021-11-26 14:56	~~(RD) Fu-chiang Young~~	File Added: before tuning-2.png
2021-11-26 14:56	~~(RD) Fu-chiang Young~~	File Added: Data.xls
2021-11-26 14:56	~~(RD) Fu-chiang Young~~	File Added: Good unit.jpeg
2021-11-26 14:56	~~(RD) Fu-chiang Young~~	File Added: Little gap unit.jpeg
2021-11-26 14:56	~~(RD) Fu-chiang Young~~	File Added: non bushing unit.jpeg
2021-11-26 14:56	~~(RD) Fu-chiang Young~~	Note Added: 0008791
2021-12-06 10:50	~~(RD) Fu-chiang Young~~	File Added: FT2 K18X001 test result value - 20211206.xls
2021-12-06 10:50	~~(RD) Fu-chiang Young~~	Note Added: 0008844
2021-12-07 14:10	(ALTech) SH Son	Note Added: 0008850
2021-12-07 16:09	~~(RD) Fu-chiang Young~~	File Added: K18X001.00 FT2 station test fail issue report_v2.pptx.pptx
2021-12-07 16:09	~~(RD) Fu-chiang Young~~	Note Added: 0008852
2021-12-08 09:42	(ALTech) SH Son	Note Added: 0008857
2021-12-08 10:29	~~(RD) Fu-chiang Young~~	Note Added: 0008860
2021-12-08 11:45	~~(RD) Fu-chiang Young~~	File Added: OQC report_XX02.pdf
2021-12-08 11:45	~~(RD) Fu-chiang Young~~	File Added: OQC report_XX03.pdf
2021-12-08 11:45	~~(RD) Fu-chiang Young~~	Note Added: 0008866
2021-12-08 12:49	(ALTech) SH Son	Note Added: 0008867
2021-12-08 16:31	~~(RD) Fu-chiang Young~~	Note Added: 0008873
2021-12-09 09:35	(ALTech) SH Son	Note Added: 0008883
2021-12-09 09:44	~~(RD) Fu-chiang Young~~	Note Added: 0008884
2021-12-09 16:08	~~(RD) Fu-chiang Young~~	File Added: 1KHz woofer balance.png
2021-12-09 16:08	~~(RD) Fu-chiang Young~~	File Added: 400Hz woofer balance.png
2021-12-09 16:08	~~(RD) Fu-chiang Young~~	Note Added: 0008887
2021-12-10 09:37	~~(RD) Fu-chiang Young~~	File Added: K18X001 Verify new test program V4.8.xls
2021-12-10 09:37	~~(RD) Fu-chiang Young~~	Note Added: 0008895
2021-12-10 11:08	(ALTech) SH Son	Note Added: 0008897
2021-12-28 18:49	(SW) Jacky Chiang	Severity	s2-severe => s3-moderate
2021-12-30 17:12	~~(RD) Fu-chiang Young~~	File Added: K18X001.00 100pcs FT2 pass DUT data.xlsx
2021-12-30 17:12	~~(RD) Fu-chiang Young~~	Note Added: 0009180
2021-12-30 17:19	~~(RD) Fu-chiang Young~~	File Added: K18X001.00 FT2 station SOU17, SOU18 fail issue report.pptx
2021-12-30 17:19	~~(RD) Fu-chiang Young~~	Note Added: 0009181
2022-01-05 14:48	(ALTech) SH Son	Note Added: 0009203
2022-01-05 16:21	~~(RD) Fu-chiang Young~~	File Added: Woofer balance test spec.png
2022-01-05 16:21	~~(RD) Fu-chiang Young~~	Note Added: 0009205
2022-01-13 08:40	(ALTech) SH Son	Note Added: 0009335
2022-02-11 09:17	~~(RD) Fu-chiang Young~~	File Added: K18X001 Acoustic Chamber Test Report_V1.2.pptx
2022-02-11 09:17	~~(RD) Fu-chiang Young~~	Note Added: 0009432
2022-02-11 09:20	~~(RD) Fu-chiang Young~~	File Added: 1643279024735746.mp4
2022-02-11 09:20	~~(RD) Fu-chiang Young~~	Note Added: 0009433
2022-02-11 14:59	(ALTech) SH Son	File Added: equipment list.xlsx
2022-02-11 14:59	(ALTech) SH Son	Note Added: 0009438
2022-02-11 15:01	(ALTech) SH Son	Note Edited: 0009438
2022-02-14 10:26	~~(RD) Fu-chiang Young~~	Note Added: 0009441
2022-02-17 18:21	~~(RD) Fu-chiang Young~~	File Added: equipment list_V1.1.xlsx
2022-02-17 18:21	~~(RD) Fu-chiang Young~~	Note Added: 0009467
2022-02-18 09:04	(ALTech) SH Son	Note Added: 0009471
2022-02-22 11:53	~~(RD) Fu-chiang Young~~	File Added: Acoustic Chamber Testing Report_Consolidation.pdf
2022-02-22 11:53	~~(RD) Fu-chiang Young~~	Note Added: 0009485
2022-02-22 14:14	(ALTech) SH Son	Note Added: 0009486
2022-02-22 15:59	~~(RD) Fu-chiang Young~~	Note Added: 0009488
2022-03-01 16:40	~~(RD) Fu-chiang Young~~	File Added: Chamber inside during test.mp4
2022-03-01 16:40	~~(RD) Fu-chiang Young~~	File Added: Acoustic Chamber Testing Report_Consolidation20210720.pdf
2022-03-01 16:40	~~(RD) Fu-chiang Young~~	File Added: K18X001 Acoustic Chamber Test Report_V1.3.pptx
2022-03-01 16:40	~~(RD) Fu-chiang Young~~	Note Added: 0009516
2022-03-02 10:43	(ALTech) SH Son	File Added: 이미지 1082.png
2022-03-02 10:43	(ALTech) SH Son	Note Added: 0009522
2022-03-02 17:08	~~(RD) Fu-chiang Young~~	File Added: NI Serial Number.png
2022-03-02 17:08	~~(RD) Fu-chiang Young~~	File Added: K18X001 Acoustic Chamber Test Report_V1.3-2.pptx
2022-03-02 17:08	~~(RD) Fu-chiang Young~~	Note Added: 0009529
2022-03-02 18:11	~~(RD) Fu-chiang Young~~	File Added: Chamber 1 and Chamber 2 range.png
2022-03-02 18:11	~~(RD) Fu-chiang Young~~	Note Added: 0009530
2022-03-03 08:47	(ALTech) SH Son	Note Added: 0009531
2022-03-03 08:48	(ALTech) SH Son	Note Edited: 0009531
2022-03-11 08:21	(ALTech) SH Son	Note Added: 0009584
2022-03-18 14:04	~~(RD) Fu-chiang Young~~	File Added: OTT_Test.7z
2022-03-18 14:04	~~(RD) Fu-chiang Young~~	File Added: OTT SourceCode20220104_V4.9.zip
2022-03-18 14:04	~~(RD) Fu-chiang Young~~	Note Added: 0009647
2022-04-06 08:56	~~(RD) Fu-chiang Young~~	File Added: NI Serial Number-2.png
2022-04-06 08:56	~~(RD) Fu-chiang Young~~	Note Added: 0009798
2022-04-17 13:55	~~(RD) Fu-chiang Young~~	File Added: chamber-1.zip
2022-04-17 13:55	~~(RD) Fu-chiang Young~~	File Added: chamber-2.zip
2022-04-17 13:55	~~(RD) Fu-chiang Young~~	Note Added: 0009893
2022-04-18 09:24	(ALTech) SH Son	Status	assigned => confirmed
2022-04-18 09:24	(ALTech) SH Son	Note Added: 0009894
2022-08-17 16:01	~~(RD) Fu-chiang Young~~	Note Added: 0010646
2022-08-17 16:01	~~(RD) Fu-chiang Young~~	Status	confirmed => closed
2022-08-17 16:01	~~(RD) Fu-chiang Young~~	Resolution	open => fixed

View Issue Details

Relationships

Users monitoring this issue

Activities

Issue History

related to	0000840	closed	~~(RD) Fu-chiang Young~~	[SWAN] Schematic, PCB, new items.
related to	0001126	closed	(MFG) An Tran	[SWAN] Manufacturing specification for mass production